Members FleurFeroce Posted August 14, 2020 Members Report Posted August 14, 2020 Desperately need part 33512 the gear for between arms in cylinder....plate 1047 Pinion w/ 2 238D thanks Quote
Members Constabulary Posted August 15, 2020 Members Report Posted August 15, 2020 (edited) would be good when you post a picture of that plate so the folks know better what you are talking about With "arms" you mean the long and short toothed rack, right? 33512 is the shuttle carrier driving pinion. I have the 33513 pinion but looks like the 33512 has the set screw in a different position, right? Edited August 15, 2020 by Constabulary Quote
Members jimi Posted August 15, 2020 Members Report Posted August 15, 2020 (edited) 3 hours ago, Constabulary said: would be good when you post a picture of that plate The plate number is the page illustration, Says "PLATE 1047 - FULL SIZE". He/she is looking for the 33512 driving piñion....That is strange looking??? 2 screws?? so the shuttle carrier has no hole then?? I do not think you will find one of them around?? Edited August 15, 2020 by jimi Quote
Members Constabulary Posted August 15, 2020 Members Report Posted August 15, 2020 Jimi - to me it looks like 1 screw but in a different position, usually the screw is placed in the center of the "beefed" section on the driving pinion but on 33512 it looks like shifted to the right - or not? Or do you think there is a 2nd screw left of the beefed section? I dunu Quote
Members jimi Posted August 15, 2020 Members Report Posted August 15, 2020 5 hours ago, Constabulary said: Jimi - to me it looks like 1 screw but in a different position, usually the screw is placed in the center of the "beefed" section on the driving pinion but on 33512 it looks like shifted to the right - or not? Or do you think there is a 2nd screw left of the beefed section? I dunu Yes Folker, in the parts list it has two #238 screws Quote
Members Constabulary Posted August 16, 2020 Members Report Posted August 16, 2020 (edited) now I got it - just read the list and noticed 2 screws are mentioned... interesting. They do not mention a different shuttle carrier other than the 8605. So maybe a pinion for solving timing issues or so... I don´t know... You know what I mean? Maybe FleurFeroce can post some pictures of his / her shuttle carrier. Edited August 16, 2020 by Constabulary Quote
Members FleurFeroce Posted August 19, 2020 Author Members Report Posted August 19, 2020 machine at repair shop, got most of the parts on ebay. its a 1902 so therein lies the issue. the ONLY part from me using the baby Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.