Members KennethM Posted August 30, 2020 Members Report Posted August 30, 2020 What's up guys I have a cobra class 26. I always have issuies on curves to get my knot centered. I think it's just human error and not tension. I burry the needle dead bottom then come up just a hair. Sometimes it looks right and sometimes it does, sometimes it's a random knot showing Quote
Members Constabulary Posted August 30, 2020 Members Report Posted August 30, 2020 (edited) I make turns when the needle is further up and the hook has caught the thread loop. Open the slide plate / hook cover and hand crank your machine and check where the hook tip is when you make the turn. Edited August 30, 2020 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Northmount Posted August 30, 2020 Report Posted August 30, 2020 Also don't lift the foot too high or it will release your top tension. Tom Quote
Members KennethM Posted August 31, 2020 Author Members Report Posted August 31, 2020 I'll try bringing the needle higher and seeing what happens.it was working fine then just having some bad luck Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.