Members shoepatcher Posted October 22, 2020 Members Report Posted October 22, 2020 Someone a while ago in Australia was advertising that they had the singer29K foot #8666 being built in China. Anyone remember who that was and if they have any left? glenn Quote
Members Constabulary Posted October 22, 2020 Members Report Posted October 22, 2020 I noticed the number in the 29K manual but whats actually the difference? I mean technically. Will check what # my feet have - never did... Quote
Members Constabulary Posted October 22, 2020 Members Report Posted October 22, 2020 (edited) Oh - I have an OEM Singer foot with #8666. I thought it is just the standard coarse foot. Not sure what the difference is compared with the standard coarse foot. But if you ask me it just look like the standard Adler 30 coarse foot. I will take some pictures tomorrow.... Edited October 22, 2020 by Constabulary Quote
Members Constabulary Posted October 24, 2020 Members Report Posted October 24, 2020 These are the two feet I have. The two numbers are mentioned in the 29K1 - 29K33 manual as standard feet that come with the machine. Dunu what the difference to the later feet mentioned in the 29K71 - 29K73 series manual is. Quote
Members shoepatcher Posted October 24, 2020 Author Members Report Posted October 24, 2020 thanks C Quote
Members DLee Posted March 26, 2022 Members Report Posted March 26, 2022 Feeding foot #8666 is specific for the 29K58 & 29K60 Waxed Thread. All others use different feet. Quote
Members shoepatcher Posted March 26, 2022 Author Members Report Posted March 26, 2022 Actually it was on for the long arm big bobbin Singer shoepatchers 29K 55, 60, 72, 172. glenn Quote
Members DLee Posted March 30, 2022 Members Report Posted March 30, 2022 I bought a 29K60 from a cobbler’s estate. It stitches nice, but won’t pick up its foot. It shuffles, so it drags the leather fore & back again. Consequently, unless I pull the leather along, all the stitches land in the same hole. ☹️ Before dismantling the thing, which could turn out worse, would CONSTABULARY consider selling me that #8666 foot? Quote
Members Constabulary Posted March 30, 2022 Members Report Posted March 30, 2022 26 minutes ago, DLee said: Before dismantling the thing, which could turn out worse, would CONSTABULARY consider selling me that #8666 foot? He wouldn´t cause he only has one of them ====== Have you checked the foot lift adjuster on your machine and have set the stitch length adjuster to a longer stitch length? Have you read the manual? To start with something - please post some good clear pictures of your machine from front and back. Quote
CowboyBob Posted March 30, 2022 Report Posted March 30, 2022 1 hour ago, DLee said: I bought a 29K60 from a cobbler’s estate. It stitches nice, but won’t pick up its foot. It shuffles, so it drags the leather fore & back again. Consequently, unless I pull the leather along, all the stitches land in the same hole. ☹️ Before dismantling the thing, which could turn out worse, would CONSTABULARY consider selling me that #8666 foot? On the backside of the machine there's a wingnut adjustment that has L,M,H loosen the wingnut & move it so the line is on the H & report back what happens. Quote
Members shoepatcher Posted March 31, 2022 Author Members Report Posted March 31, 2022 DLee. You can go to the 29K72 book. Almost same machine but for a few parts. They have and exploded view of the machine. I may have one. Let me look. glenn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.