Members seekadventureco Posted December 7, 2020 Members Report Posted December 7, 2020 Used 2x and has extra cutting board and tipping tubes. Turn out professional-level belts and straps 1" to 2" (25 to 51 mm) wide and up to 15 oz. (6.0 mm) with one pull of the handle. This heavy-duty machine uses 4 tons(562 kg/cm) of compression force to cut four holes, buckle slot and point at either tip of a belt. The dual measurement gauge and rear fence stop allow for precise cutting of buckle holes and strap ends, resulting in a symmetrical, perfectly tipped belt strap every time. Billet end cutting die, buckle head cutting die, #3973-15 Tipping Cutting Board, two-part operating handle, replacement tubes and instructions included. Measures 11-3/4" x 16-1/2" x 29-1/2" (300 x 419 x 741 mm). B9E28638-586E-408E-BBB2-B6E6518688AA.webp
Members truman Posted December 7, 2020 Members Report Posted December 7, 2020 Hi there, Price? Where are you located?
Members DavidMillsSaddlery Posted December 7, 2020 Members Report Posted December 7, 2020 7 hours ago, truman said: Hi there, Price? Where are you located? Ditto!
Recommended Posts