Cowboy 3200 machine need belt

[grizzlysaddlery]

I've got a cowboy machine and need to know to know the length of the  belt that goes to the head the belt on the machine has 

m57 on it i take it that it is 57 inches long. i bought the machine new. but none of the paper work gives any information on 

that. 

[CowboyBob]

Yes,M57 is a 57" belt.

[grizzlysaddlery]

do you carry a belt that size?

[CowboyBob]

Yes we do but you can also get it @ TSC or Atwoods or even a auto parts store it needs to be 3/8" wide.

[grizzlysaddlery]

On 1/10/2021 at 1:12 PM, CowboyBob said:

Yes,M57 is a 57" belt.

i got one from orieiy's auto parts but it is serrated and slips unless i start it by hand ill check other places

[CowboyBob]

Adjust it,the speed reducer has 2-bolts you can loosen & lower it down to tighten it.

 

[DrmCa]

When I replace accessory belts on my cars, I keep old ones and if they are about the right size, I cut them along the groves into 2-grove belts. They then work for another decade on my sewing machines.

[jcwalsh]

I ordered a M57 belt based on this post and found out the 3200 can have either a 56, 57 or 58 inch belt depending on the build date.  Ryan @ Neel's Saddlery, where I purchased it, is kind enough to send me a replacement.  The belt was lost during a house move so there was not an issue with reliability.