Jump to content

4 inch or smaller head knife around $150 or less? Is a "French" knife a good alternative?


Recommended Posts

Posted
2 minutes ago, jcuk said:

Have to confess i have never used this kind of knife as you can tell from my previous post is this topic its a Round knife foe me at least 95% of the time .Skinny ali things with a really sharp point ? 

LOL! Third from the right in Hardradas pic above. I hold it like a pencil and it's easy to follow any curve with precision. Bear in mind I only work up to 2.4mm.

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Members
Posted
25 minutes ago, toxo said:

LOL! Third from the right in Hardradas pic above. I hold it like a pencil and it's easy to follow any curve with precision. Bear in mind I only work up to 2.4mm.

Oh a Exacto type knife i have a full set which i have had  25+ years all pretty much in mint condition that's how much i use them,  for cutting lighter leather i use a Clicker knife which is the far right one.

Posted
2 minutes ago, jcuk said:

Oh a Exacto type knife i have a full set which i have had  25+ years all pretty much in mint condition that's how much i use them,  for cutting lighter leather i use a Clicker knife which is the far right one.

Have looked at the clicker type but has a thicker blade so can't get enough pressure if holding like a pencil and if you use overhand I seem to have trouble seeing the line. And why clicker?

  • Members
Posted (edited)
17 minutes ago, toxo said:

Have looked at the clicker type but has a thicker blade so can't get enough pressure if holding like a pencil and if you use overhand I seem to have trouble seeing the line. And why clicker?

Easier to cut and paste this. Many make their own blades from old hack saw blades.

https://www.artisanleather.co.uk/clicker-knife-1476-p.html

Edited by jcuk
  • CFM
Posted

I tried cutting curves with the clicker knife but I could never get it to work for me. I also wonder whence the term 'clicker' came? Mine doesn't make any sound when I use it. :thinking:

  • Members
Posted
5 minutes ago, Hardrada said:

I tried cutting curves with the clicker knife but I could never get it to work for me. I also wonder whence the term 'clicker' came? Mine doesn't make any sound when I use it. :thinking:

Might be of interest.

https://www.crockettandjones.com/the-article/the-clicking-room-secrets-of-the-shoe-trade/

  • Members
Posted (edited)

Why are clicker knives called clicker knives?

In the early days of manufacture of leather goods,  before a lot of automation, the pieces would be cut out by hand. So a factory would have rows of benches with leatherworkers at them; and a large cutting out hall would have many workers. Top class, and therefore expensive, leather goods are still made this way, but on a smaller scale

On thick leather the pattern would be cut out by a few cuts on the same line . At first, before the piece was fully cut out, when the knife came to the edge of the hide it would slide off the edge and hit the bench underneath, making a clicking noise as it did so

Thus the knife became known as a clicker knife, after the sound it made

Traditionally the workers would be provided with a basic, blunt, knife or awl, so they could sharpen and shape it to suit themselves. This practice has continued for some makers 

Edited by zuludog
Posted
6 minutes ago, zuludog said:

Why are clicker knives called clicker knives?

In the early days of manufacture of leather goods, like bags and footwear, before a lot of automation, the pieces would be cut out by hand. So a factory would have rows of benches with leatherworkers at them; and a large cutting out hall would have many workers

On thick leather the pattern would be cut out by a few cuts on the same line . At first, before the piece was fully cut out, when the knife came to the edge of the hide it would slide off the edge and hit the bench underneath, making a clicking noise as it did so

Thus the knife became known as a clicker knife, after the sound it made

Traditionally the workers would be provided with a basic, blunt, knife or awl, so they could sharpen and shape it to suit themselves. This practice has continued for some makers 

Thanks dog. I have no problem hanging on to old names even if they're redundant. Where I struggle is when they put £50 on the price because "It's a Clicker knife". LOL

  • Members
Posted

I know we're in danger of going off topic here, but I have shaped & sharpened some of my own leatherworking knives - 

A skiving knife from a dirty, rusty old putty knife, but a good one with a forged spring steel blade; cost me 50p from a car boot sale. I used a hacksaw, files, oilstones, and a strop

A kiridashi - cum - English paring knife from a 25mm hacksaw blade

I had a cheap block plane that was fiddly and difficult to adjust & use, but the blade was quite good, so I turned it into a Japanese style leather knife

I had arranged for my local photographic club to help me post pictures, but the Lockdown stopped that. Hopefully, one day soon......

  • Members
Posted
31 minutes ago, toxo said:

Thanks dog. I have no problem hanging on to old names even if they're redundant. Where I struggle is when they put £50 on the price because "It's a Clicker knife". LOL

Have a look at www.georgebarnsleyandsons.co.uk They have a few types of fixed blade knives fairly cheap. I suspect they are old stock, and none the worse for it

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...