Help identifying swing away edge guide?

[LanceR]

Hello, All

I'm new to sewing and I bought this Consew 226R-2 at auction a bout 10 days ago.  It came with this swing away edge guide and If someone can tell me just what it's for I'd be grateful. 

 

Thanks

 

Lance

[kgg]

  On 6/6/2021 at 6:32 PM, LanceR said:

I'm new to sewing and I bought this Consew 226R-2 at auction a bout 10 days ago.  It came with this swing away edge guide and If someone can tell me just what it's for I'd be grateful. 

Expand  

To get a good answer could you give a get a photo from the front and what the stamped information says (numbers and manufacturer info) . The stamped info then can be tracked back to the manufacturer and it's intended propose. The attachment appears to be made by Tennessee Attachment Company (tennattachment.com).

The machine appears to have had the original pressor foot removed, possibly the feed dog changed and the bottom thread guide and screw located just before the needle appears to have been replaced with a make shift guide arrangement.

kgg

[LanceR]

Good call.  It comes back as a "Pre-made cord welt folder guide.  http://www.tennattachment.com/741 Pre-Made Cord Welt Folder.html

Here's a picture of the feed dog area.  The machine came without any feet.  I bought it from the North Carolina state surplus site and it came from the NC Department of Corrections.

 

Thanks for the reply and best regards,

 

Lance

 

 

 

[jimi]

It Looks like it is for sewing on piping??

 

Edited June 7, 2021 by jimi

[LanceR]

  On 6/7/2021 at 1:01 PM, jimi said:

It Looks like it is for sewing on piping??

 

Expand  

Yes, it's for welting/piping.  For now it will come off and go in the tool chest that has my extra sewing things in it.

Best regards,

 

Lance