Members chainftw Posted October 24, 2021 Members Report Posted October 24, 2021 Looking for a filigree letter stamp set . Made by nocona Or anyone else . It cuts out spaces between letters as it stamps . I’m ready and willing!!! Thanks
RockyAussie Posted October 24, 2021 Report Posted October 24, 2021 Could not find anything in my search to do with letter sets by nocona. Have you got any pictures showing what you mean? I just laser cut whatever letters I want and Word or Corel draw gives me a wide range of fonts. Even designed a font of my own for doing that.
Members chainftw Posted October 24, 2021 Author Members Report Posted October 24, 2021 Found this on here from a while ago ..
RockyAussie Posted October 25, 2021 Report Posted October 25, 2021 On 10/24/2021 at 10:11 AM, chainftw said: It cuts out spaces between letters as it stamps . Looks interesting but how do they cut out spacers between the letters?
Members chainftw Posted October 25, 2021 Author Members Report Posted October 25, 2021 Look closely at them and you will see .
RockyAussie Posted October 25, 2021 Report Posted October 25, 2021 Are you meaning that you want letters that have just the outline so that the middle of the letter becomes raised? I was thinking that you meant the space between one letter and the next letter. Here is a pic of one I did recent and you can do it either way you want
Members chainftw Posted October 26, 2021 Author Members Report Posted October 26, 2021 No it would look like this that I did, but without having to hand cut the letters out ..
Members chainftw Posted October 26, 2021 Author Members Report Posted October 26, 2021 1 hour ago, RockyAussie said: Are you meaning that you want letters that have just the outline so that the middle of the letter becomes raised? I was thinking that you meant the space between one letter and the next letter. Here is a pic of one I did recent and you can do it either way you want No... I’ll send pic ..
RockyAussie Posted October 26, 2021 Report Posted October 26, 2021 23 minutes ago, chainftw said: No it would look like this that I did, but without having to hand cut the letters out .. AHHH.... now I get it. I have not seen any letter sets that do that before now. I have done something a little similar before which is why I made my own font up in order to get the laser cutting and printed letters to all be in a CAD form. This enabled me to print the letters to exactly line up with the cut out masking tape for painting. If you have a band knife splitter you could probably do the stamping and split it down to the thickness to remove deeper sections. Might give it a try. This is a link that shows where I posted the other similar project -
Members chainftw Posted October 26, 2021 Author Members Report Posted October 26, 2021 No, not what I’m looking for but I’ll keep you in mind if I need a stamp
Recommended Posts