Members Bert03241 Posted January 18, 2022 Members Report Posted January 18, 2022 Singer 99 sewing leather 3 to 4 oz 1 needle 1 thread size bobbin thread Quote
Moderator Wizcrafts Posted January 18, 2022 Moderator Report Posted January 18, 2022 On 1/18/2022 at 5:00 PM, Bert03241 said: Singer 99 sewing leather 3 to 4 oz 1 needle 1 thread size bobbin thread Expand Number 18 (metric 110) leather point needle. Number 69 bonded nylon top thread. Number 69 bonded nylon bobbin thread. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Bert03241 Posted January 18, 2022 Author Members Report Posted January 18, 2022 On 1/18/2022 at 5:14 PM, Wizcrafts said: Number 18 (metric 110) leather point needle. Number 69 bonded nylon top thread. Number 69 bonded nylon bobbin thread. Expand Perfect thank you so much now I can get this stuff and try my machine. It was so confusing looking at all the different sizes. Quote
Members Bert03241 Posted January 18, 2022 Author Members Report Posted January 18, 2022 OK quick question as you can tell I know nothing about sewing so is Bobbin thread different then top thread or can I use the same for both.? Quote
Contributing Member fredk Posted January 18, 2022 Contributing Member Report Posted January 18, 2022 Same thread Quote Al speling misteaks aer all mi own werk..
Moderator Wizcrafts Posted January 18, 2022 Moderator Report Posted January 18, 2022 On 1/18/2022 at 5:53 PM, Bert03241 said: OK quick question as you can tell I know nothing about sewing so is Bobbin thread different then top thread or can I use the same for both.? Expand I usually buy two spools of any color and size together and use one for the top and the other to wind bobbins. Most thread stands hold two to 4 cones. But, you can cut the thread on top and use it to load a bobbin. Then clip the excess and tie it onto the remaining cut thread and pull it through the machine, stopping before the knot hits the needle. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.