Jump to content

steadybrook

Members
 View Profile  See their activity

  • Posts

    661

  • Joined

  • Last visited

 Content Type 

Everything posted by steadybrook

  1. steadybrook
    Are these buckles solid brass from weaver and how many do you have?
  2. steadybrook
    Send me a few pictures and the price.
  3. steadybrook
    Thanks.
  4. steadybrook
    Thanks.
  5. steadybrook
    It is a bench mounted jack or vise used to hold the moccasin while you work on it.
  6. steadybrook
    Thanks Gump, Is your Sew Quiet 500 on a needle / awl machine?
  7. steadybrook
    Looking for a Moccasin Jack.
  8. steadybrook
    I am looking for a Moccasin Jack. Any leads would be appreciated .
  9. steadybrook
    Can you send them to N.S. Canada B0N1Z0 via Parcel Post? Can you send me a few Pictures of the cast iron wall mount shoe lasts and of the pattern collection. Thanks.
  10. steadybrook
    I was hoping to sew one stitch at a time around corners, also try 45 degree corner stitching. [ like pcox in the thread above , he has a servo on his randall ]. I contacted Campbell and they are just setting up a needle awl machine with a servo motor.. I am awaiting a video and reply from them.
  11. steadybrook
    How much for the cast iron wall mount units? Do you have any moccasin clamps?
  12. steadybrook
    Are these still available?
  13. steadybrook
    Thanks Bob. Does anyone have a video of a needle awl machine run by a servo motor?
  14. steadybrook
    Try Ohio Travel Bag.
  15. steadybrook
    Thanks, A bit too far from where I am at.
  16. steadybrook
    Where are you located?
  17. steadybrook
    Thanks, I would like to see the pictures. Here is my set up now with the clutch motor.
  18. steadybrook
    Can you post a few pictures of your set up on your Randall?
  19. steadybrook
    Will this type of motor work on a needle / awl machine?
  20. steadybrook
    How did the installation work out?
  21. steadybrook
    Is anyone using a servo motor on their needle / awl machines ? If so, does it allow you to stitch one stitch at a time? And what size motor are you using?
  22. steadybrook
    I was going to offer 1/2 the shipping, before the post was hijacked. There was no mention of pay pal in the thread. I support a lot of sellers on this forum and have had no problems at all. The bullshit stands.lol
  23. steadybrook
    Thanks for the bullshit, I get items from USA weekly with no problems . lol
  24. steadybrook
    How much is too expensive?
  25. steadybrook
    The #2 needles, the rest of the thread ,the colt and the Osborne chisel.. $120 shipped
×
×
  • Create New...