purplefox66
-
Content Count
129 -
Joined
-
Last visited
Posts posted by purplefox66
-
-
Thanks guys
-
I recently got some new toys from Leather Wranglers and i wanted to show them off. If you have ever thought about buying from them you won't be disappointed. Paul and Rosa are the nicest people to deal with even when i changed my mind a couple times. The knifes turned out so beautiful. I supplied the wood which is dyed stabilized oregon big leaf maple from vivid hardwoods . I have a beautiful custom sk-v swivel knife that i will post pictures later. The pictures dont even begin to show the beauty of the wood. I have one more knife in the works and once all my treasured toys are done i will post pictures of all my toys.
.jpeg.d9b62fdc7bbc7091c4b84b03f6be7285.jpeg)
-
-
Thanks for the help guys
-
I bought a blade from leather wranglers and that blade is so sharp.
-
draw gage is a better version of a strap cutter
-
What is the better way to go? buy a new one or get one from Bruce Johnson? The reason i ask i was reading not sure where that the newer ones don't last very long?
-
Okay sorry just trying to be helpful.
-
Nice work
-
It is very easy to adj the tension look for AlBane for leather on youtube and he goes over how to.
-
to me it looks like you need more bobbin tension. Nice work though.
-
How about cutting the case in half and adding a strip of leather.
-
springfield leather also sells replacement blades
-
110 for a us cobra
-
Beautiful worK
-
I think your dealer is lying to you.
-
The way i do corners go through the holes twice the hole before the corner hole and the hole after the corner .
-
You do beautiful work.
-
seperate the two pieces of leather using a modeling tool pull the tail of your lace so it leaves an empty hole on the backside going from the middle of the two pieces and come out the hole the tail was in and continue lacing as normal keeping the two tails between the two pieces of leather..
-
On 3/9/2023 at 7:37 PM, DonInReno said:It’s nice that they have a table top base, but it has a few things I’m not thrilled about. There is a finger of material on the base that extends under the arm so it doesn’t tip forward - this just makes the already short arm even more restricted.
That top is just normal Formica covered particle board, which is fine, and it’s drilled for a normal motor mount and speed reducer. However, I bought more of this 5/8” steel than I needed and once its cut to size and edges are finished, will be a nice heavy base. The metal is thick enough that anything mounted to it just needs a tapped hole without nuts on the bottom side.
My idea was that they have a pedal that should work for you
-
Why dont you ask artisan as they have a bench top model 3200
-
I have now idea of what it would be worth. maybe $50.00
-
Grave stone makers is another great place to get free piece of granite for tooling.
-
Springfield leather ha a lot of roo lace
Carved Nameplate on Bum Bag
in Show Off!!
Posted · Report reply
You do very beautiful work Walter. Did you draw your letters. I will be making a purse for my sister and want to have initials with that size and style.