threepets

I am hoping somebody may have seen a 3 window ID Wallet Pattern

Any fabric store sells bulk Vinyl in various weights. I bought enough to last a life time and it was in the remnants bin, for $1.86

Any Fabric store sells bulk Vinyl in various weights by the yard. I just bought enough to last me a life time and it was in the remnants bin for $1.86

Hi Cheryl,the press is still available .I am willing to package it up and ship from Buffalo. You are 350 miles straight east of where I live. If you want it shipped let me know. I will have to crate it up and get e shipping quote for you. Robin

The Plates measure 8" x 5" .I have 4 and 5" dies ,it cuts them out clean and easily in 10 -12 oz.

I have for sale a Harbor Freight 6 Ton press converted to click small parts , it comes with steel plates and resolene clicking plates. I have more photos I can email. threepets@sympatico.ca $265 I live in Buffalo New York

I have small clicker for sale where would I post ?

I have a small clicker for sale, pm I'll send you a pic. I live in Fort Erie. threepets@sympatico.ca

Do you have to buy a foot press ? I have a Heritage Hand Press. I would like to be able to apply Loop Staples with it ,is that possible?

Is there a tool available(other than needle nose) to make using loop staples easier?

Thank You very much,That is what I was looking for. Robin

I am sorry if I am posting incorectly. I was browsing through this site last week and I came accross a page that offered a class on making chaps. I lost the link and cannot remember how I arrived at the fellows page. All I remember is the person lived somewhere in western US and the class dates are July10-15. I hope some reads this that can help me

I am trying to find a Sewing Machine Mechanic in or within a couple hundred mile drive of Buffalo New York. I need service for an Adler 30-10 Boot Patcher with a Servo Motor built in.Nice machine just needs a little TLC of an exprienced Sewing Machine Mechanic. Any advice would be appreciated. Robin PS Thank You BillB for the posting Advice

I am trying to find a Sewing Machine Mechanic in or within a couple hundred mile drive of Buffalo New York. I need service for an Adler 30-10 Boot Patcher with a Servo Motor built in.Nice machine just needs a little TLC of an exprienced Sewing Machine Mechanic. Any advice would appreciated. Robin

I sew with an Adler 267-373Table Top machine.I was wondering if there is any way to slow down the start of the sewing run?This machine continually runs off on me and I am aware of how it starts and still cannot get control of the start. Any sugestions would be appreciated.

I have purchased from Ohio Travel Bag.I made a mistake of buying quantity of both buckles and snaps thinking I would be buying quality.Both products I bought were made of light inferior metals that bend and rust.(buckles that bend with finger presure) I have a thousand pieces of these products that I cannot use and have had to replace where they have been applied. Brass turns green when used in an application where human sweat is envolved) so I don't know where to turn. I know there is a quality product out there ,I just haven't found it yet. Thank You for taking the time to reply,trying to help. Robin

I rebuild helmets (helmet harness and such).I have been having a problem the last year or so with the double cap rivets . They have been rusting after a short period of time. I have bought from Weaver and a few other places with no luck. Weaver suggested their stainless steel rivet .I ordered some which was supposed to be shiny or nickel which I need for appearance but the stainless steel was gun metal in colour .Could somebody point me in the right direction for good quality rivets.

SOLD APRIL 1st

SOLD APRIL 1ST

I have very small shop with no chance of upgrading anytime soon.I was wondering if anyone would have advice on material storage or any advice on working in a confined area. Maybe some direction in what might work for a patern table.Any advice would be apreciated. ThankYou Robin

For Sale Artisan Toro 3000 $1500 Including Flat Bed Work Platform TORO-3000 Sews up to 3/4" of Leather. 9" Long Cylinder. Sews Size 138 to 346 Thread. Recommended Needle: Schmetz 794 Presser Foot Lift: 1 1/16" Maximum Stitch Length: 3 Stitches per inch. Maximum Sewing Speed: 150 SPM. Complete on a Heavy Duty Adjustable Pedestal and Artisan ESM Servo Motor Drive Unit with an SR-2 Speed Reducer.

Yes I am going to buy the 16" version of what I am using as soon as I sell this machine..I am very happy with this machine.Some of the saddles I repair have to be completely dismanteled though so I can sew on them with the 9" arm.

The arm is 9".I am selling because I am going to buy a bigger machine with a 16" arm

For Sale Artisan 3000 $1600 3yrs old sewing feet L&R Swing out roller guide needles and 1 spool Br 277 tools reply to threepets@sympatico.ca $1700 with flat sewing platform will ship any where at buyers expence Posted Febuary 4th 2010