threepets

I am hoping somebody may have seen a 3 window ID Wallet Pattern

Any fabric store sells bulk Vinyl in various weights. I bought enough to last a life time and it was in the remnants bin, for $1.86

Any Fabric store sells bulk Vinyl in various weights by the yard. I just bought enough to last me a life time and it was in the remnants bin for $1.86

Hi Cheryl,the press is still available .I am willing to package it up and ship from Buffalo. You are 350 miles straight east of where I live. If you want it shipped let me know. I will have to crate it up and get e shipping quote for you. Robin

The Plates measure 8" x 5" .I have 4 and 5" dies ,it cuts them out clean and easily in 10 -12 oz.

I have for sale a Harbor Freight 6 Ton press converted to click small parts , it comes with steel plates and resolene clicking plates. I have more photos I can email. threepets@sympatico.ca $265 I live in Buffalo New York

I have small clicker for sale where would I post ?

I have a small clicker for sale, pm I'll send you a pic. I live in Fort Erie. threepets@sympatico.ca

Do you have to buy a foot press ? I have a Heritage Hand Press. I would like to be able to apply Loop Staples with it ,is that possible?

Is there a tool available(other than needle nose) to make using loop staples easier?

Thank You very much,That is what I was looking for. Robin

I am sorry if I am posting incorectly. I was browsing through this site last week and I came accross a page that offered a class on making chaps. I lost the link and cannot remember how I arrived at the fellows page. All I remember is the person lived somewhere in western US and the class dates are July10-15. I hope some reads this that can help me

I am trying to find a Sewing Machine Mechanic in or within a couple hundred mile drive of Buffalo New York. I need service for an Adler 30-10 Boot Patcher with a Servo Motor built in.Nice machine just needs a little TLC of an exprienced Sewing Machine Mechanic. Any advice would be appreciated. Robin PS Thank You BillB for the posting Advice

I am trying to find a Sewing Machine Mechanic in or within a couple hundred mile drive of Buffalo New York. I need service for an Adler 30-10 Boot Patcher with a Servo Motor built in.Nice machine just needs a little TLC of an exprienced Sewing Machine Mechanic. Any advice would appreciated. Robin

I sew with an Adler 267-373Table Top machine.I was wondering if there is any way to slow down the start of the sewing run?This machine continually runs off on me and I am aware of how it starts and still cannot get control of the start. Any sugestions would be appreciated.

I have purchased from Ohio Travel Bag.I made a mistake of buying quantity of both buckles and snaps thinking I would be buying quality.Both products I bought were made of light inferior metals that bend and rust.(buckles that bend with finger presure) I have a thousand pieces of these products that I cannot use and have had to replace where they have been applied. Brass turns green when used in an application where human sweat is envolved) so I don't know where to turn. I know there is a quality product out there ,I just haven't found it yet. Thank You for taking the time to reply,trying to help. Robin

I rebuild helmets (helmet harness and such).I have been having a problem the last year or so with the double cap rivets . They have been rusting after a short period of time. I have bought from Weaver and a few other places with no luck. Weaver suggested their stainless steel rivet .I ordered some which was supposed to be shiny or nickel which I need for appearance but the stainless steel was gun metal in colour .Could somebody point me in the right direction for good quality rivets.

SOLD APRIL 1st

SOLD APRIL 1ST

I have very small shop with no chance of upgrading anytime soon.I was wondering if anyone would have advice on material storage or any advice on working in a confined area. Maybe some direction in what might work for a patern table.Any advice would be apreciated. ThankYou Robin

For Sale Artisan Toro 3000 $1500 Including Flat Bed Work Platform TORO-3000 Sews up to 3/4" of Leather. 9" Long Cylinder. Sews Size 138 to 346 Thread. Recommended Needle: Schmetz 794 Presser Foot Lift: 1 1/16" Maximum Stitch Length: 3 Stitches per inch. Maximum Sewing Speed: 150 SPM. Complete on a Heavy Duty Adjustable Pedestal and Artisan ESM Servo Motor Drive Unit with an SR-2 Speed Reducer.

Yes I am going to buy the 16" version of what I am using as soon as I sell this machine..I am very happy with this machine.Some of the saddles I repair have to be completely dismanteled though so I can sew on them with the 9" arm.

The arm is 9".I am selling because I am going to buy a bigger machine with a 16" arm

For Sale Artisan 3000 $1600 3yrs old sewing feet L&R Swing out roller guide needles and 1 spool Br 277 tools reply to threepets@sympatico.ca $1700 with flat sewing platform will ship any where at buyers expence Posted Febuary 4th 2010

I have been looking and can't seem to find much information on chaps.I would like to find somebody who has classes for teaching the process of making chaps.Would anyone have any information on this topic? Robin