Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by KTWolf

  1. I love the way you put together that darker leather one--it matches my footwear, for sure! Thanks for sharing!
  2. So what you mean is that you recreated the originals, but with more desired materials? Or that you took apart the existing and swapped out the retro-materials for new hair-on materials instead?
  3. Hurray, I finished making a water stone holder! I've been busy fixing up a scythe from the 1950's. Scythes are sharpened regularly throughout use, so it is standard to carry a sharpening stone in a holster that contains water, keeping the stone wet and also removing grit from the stone as it's used. I looked at all the stone-holders that were available for sale online, and though they aren't that expensive, I wanted to try my hand at making one from leather. I came on this forum--thank you for being!--and found out what "boiled leather" means and what temperatures work best. I visited the Skillcult YouTube channel to review using pine pitch to waterproof a liquid-containing vessel made of leather. I designed this thing as I went along, which means a lot of the stitches end up looking kind of Frankenstein; done is better than perfect. First step was to wrap the stone twice around with cloth; put a soda-pop bottle over that; and heat-shrink the plastic to the shape of the cloth-wrapped stone. This became the "form". Then filled the bottle-plastic form with wet sand, put veg-tan leather piece into hot water until it began to tighten a tiny bit, and wrapped it around the form. (Photo quality sucks. I have a camera somewhere, but this was all taken by my computer's camera.) Here's the finished product containing the stone: Piece by piece photos: Two-part holder and stone The "holster" is also the lid to keep water from coming out. Made more sense to be able to dismantle into two parts for periodic re-waterproofing. Water holder Back in March, I spent a week collecting pine sap and resin and cooking it out into a tin, so I could use it for waterproofing and glue. This was the first time I used it to waterproof leather, in the same way that it was once used to make the English "blackjack" beer mugs out of boiled leather. All the rest of the leather is waxed for maximum waterproofing; but the inside of this was coated with pine resin, then coated again with a mixture of pine resin and beeswax. Attaching the holster-and-lid Here, half-way pulled up, not in position yet The lid has a double-layer of rings fitted to the opening of the water-holder to form a reasonably tight seal, leaving just enough room for the stone to fit through the top easily. A belt-loop would necessarily spill the water whenever I bent over. Instead, I decided it should be tied on through this hole, with the ability to hang freely when I'm not standing straight up. Holds water with minimal spillage, yay! Here's my older scythe blade, awaiting sharpening, and the stone that will hone it during use. I've used it on three occasions, and it works in the field, YAY! Again, thanks to this forum for the resource of knowledge that helped in this project.
  4. Thanks, @crazytailorlady, @Samalan, and @battlemunky. @chuck123wapati, Yesterday we went out bowfishing, and my archer friend shot four great big carp in just over an hour. One of them was 38" long and close to 40 pounds! Two more were about 35 pounds each, the fourth was just under 30#. After trading with a Hmong family for their fish's hide, I have 5 fish-hides cleaned and soaking in degreaser. Let the fish-hide tanning begin. Also, how am I going to eat 2 gallons of white fish meat? What great days these are!
  5. Ha! I resemble that remark, Jonas! After I finished re-handling my axe head, reshaping the handle to fit my hands, and then made a nice leather blade-guard for it, I just kept picking it up and fiddling with it, happy that it turned out just the way I'd hoped. At any rate, @Mulesaw what a beautiful creation! Thanks for sharing your pictures, especially all the functional details. I appreciate the link to that book, too.
  6. Thanks for the welcome, gents! Chuck, tanning a carp or a salmon is a different beast, to be sure. The nicest thing is how easy they are to skin. Since the meat isn't as important as the hide, I skin them as soon as they're dead, before gutting. Just cut along the edge of the skull, peel up a bit, and start pushing my fingers along underneath the skin. Almost no defleshing needed. I've only gone two rounds with tanning fish hides at this point, so I'm still working out the ideal chemistry. The key difference from a mammal hide is in the degreasing. I used standard degreasers, and it never quite got the fish smell out. After degreasing, last year I started with an alum tan, washed thoroughly, then finished it using my own odd formulation of Murphy's Oil Soap and WD-40. It made a pretty good result, flexible to a greater degree than my first attempt, and workable for making the quiver. The First Nations people of the Pacific Northwest supposedly used lart to degrease salmon hides, so this year I'm going to try out an ammonia soak; however, that can also disintegrate the hides if done incorrectly. I also have a new additive I'll be trying out, lecithin, the chemical in brains that makes brain-tanning so great. I'll be using sunflower-lecithin soaked in ethanol, then combined with vegetable oil, to finish and soften the skins. I'm still working out the kinks in chemistry, so here's hoping the third round of trial and error hits the mark. Wish me luck--my friend and I will start hunting carp this weekend, her with her bow and me with a net. If I get 10 carp I'll have plenty of skins to play with, and I can make some spiffy fishing hats.
  7. Hello, Folks. Glad to join the forum, I'm looking forward to seeing the techniques, projects, and equipment of leather crafters more experienced than me. I've been teaching myself to tan leather and furs for several years now, and I seem to be getting the chemistry and processes dialed in at last. I've made decent, wearable furs from raccoon, muskrat, chipmunk, and deer. I've made leather from the hides of squirrel, carp*, and opposum, and the more typical deer hide into buckskin. Each of these animals' hides have such unique, fascinating properties. When it comes to using the leather, my main focus is on making tool sheaths, blade-guards, and belt holsters. Recently made blade-guards for my axe and scythe. Currently I repair my own shoes, but at some point I want to learn how to make them from the ground up--or rather, from the upper down. *This photo is of a quiver I made for my bowfishing friend, from the skin of a carp she shot for me.
  • Create New...