Search the Community

Maybe has 6 hours of use, purchased in 2020 Skives light and medium leather up to 8oz Up to 2" skiving width Adjustable skiving width Integrated blade sharpener Space saving table - only 33.5" wide Includes assembled table and adjustable speed servo motor The Techsew SK-4 Leather Skiver is precision designed for edge skiving and whole surface skiving of leather for wallets, leather bags, shoes, boots, chaps, straps and more. It is used to skive and thin out the edges of leather to create clean and consistent ends. Features: Precision designed for simple and smooth operation Built in blade sharpener Adjustable skiving width Adjustable skiving speed Space saving table - only 33.5" wide Equipped with power stand and variable speed 550W Servo motor 1200 RPM Rotating Speed Skives light to medium leather up to 8oz Up to 2" skiving width 1000.00 Location is in Northern Illinois

ABOUT ME: Hi there! I am searching for someone who might need a great INDUSTRIAL sewing machine Check this out please and see if it could be of any use... I was going to create leather belts and gun holsters in Texas, but I changed my mind once I returned to Alabama...I am an aerialist and I would like to sell my machine to invest in my dream...If you're not interested PLEASE share with someone you think may be interested. The Lord works in mysterious ways, #GodBless ABOUT THE MACHINE: The Techsew 5100 Special Edition is the ultimate sewing machine designed for a wide range of leather work projects. Light range leather work: Purses, handbags, pouches, wallets, notebook covers, vests Medium range leather work: Belts, knife sheaths, scabbards, quivers, horse blankets Heavy range leather work: Saddles, gun holsters, knife sheaths, harnesses, horse tack Additionally it is also great for non-leather work applications such as tie down straps, boat/car covers, orthopaedics, thick paper binding, parachute harnesses, tarps, vinyl, canvas, synthetics, heavy webbing and more. What makes the Techsew 5100 Special Edition so special? Techsew SmartServo-NP Needle Position Motor The Techsew SmartServo-NP is an automatic needle positioning motor which saves you tons of time and effort while sewing. This powerful and versatile motor will automatically lift the needle at the end of a seam, or automatically leave it in the bottom position. This will eliminate the need to constantly turn your handwheel to position your needle. At 1HP and 800W, The SmartServo-NP will help your machine power through thick leather at any of the 16 adjustable speed settings. Additionally, a speed reducer is used in combination with the SmartServo-NP motor for added power and speed control. This system is ideal for beginner, intermediate and expert sewers as well. ALL EXCLUSIVE TO THE TECHSEW 5100 SPECIAL EDITION! Features: Triple Feed - Walking Foot (needle feed + alternating presser feet + bottom feed) 1" Presser foot clearance Sews from 6oz all the way up to 7/8" thick 16.5" Cylinder bed Equipped with Techsew SmartServo-NP motor and speed reducer to sew at slow & controlled speeds - great for novice, intermediate and professional sewers Reverse stitch - for reinforcing stitches 12 inch heavy duty flywheel Reinforced steel pedestal style table with adjustable height (sew standing up or sitting down) Includes: Complete table with casters, SmartServo-NP motor, speed reducer,TS-28 LED lamp, TS-5 LED stitch light, TLG laser guide, swing down roller guide, flatbed table attachment, 3 pkgs of Organ diamond point needles,8 bobbins, thread lube pot, left toe foot, double toe foot, center foot, smooth blanket foot set, 1 lb. (16oz) cone of thread, oiler, instruction manual, repair tools, thread clipper. Stitch length adjustment up to 11mm (7/16") Uses thread sizes 69 to 415 Uses needle sizes 18 to 27 FREE setup & instructional DVD included! Includes Limited Lifetime Warranty and FREE technical support for the life of your machine Machine comes pre-threaded, oiled, adjusted and READY TO SEW Specifications: Needle sizes: 18 to 27 Thread sizes: 69 to 415 Presser foot clearance: 1" Sewing capacity: 6oz to 7/8" thick Cylinder bed length: 16.5" Maximum stitch length: 11mm Techsew SmartServo-NP motor: 800W, 1HP, 110V, 300 to 1800RPM, 16 speed settings with bright LED display, completely silent when idle and reduced noise during operation. The most POWERFUL servo motor in the industry.