Hi there! I am searching for someone who might need a great INDUSTRIAL sewing machine
Check this out please and see if it could be of any use...
I was going to create leather belts and gun holsters in Texas, but I changed my mind once I returned to Alabama...I am an aerialist and I would like to sell my machine to invest in my dream...If you're not interested PLEASE share with someone you think may be interested.
The Lord works in mysterious ways, #GodBless
ABOUT THE MACHINE:
The Techsew 5100 Special Edition is the ultimate sewing machine designed for a wide range of leather work projects.
Light range leather work: Purses, handbags, pouches, wallets, notebook covers, vests
Medium range leather work: Belts, knife sheaths, scabbards, quivers, horse blankets
Heavy range leather work: Saddles, gun holsters, knife sheaths, harnesses, horse tack
Additionally it is also great for non-leather work applications such as tie down straps, boat/car covers, orthopaedics, thick paper binding, parachute harnesses, tarps, vinyl, canvas, synthetics, heavy webbing and more.
What makes the Techsew 5100 Special Edition so special?
Techsew SmartServo-NP Needle Position Motor
The Techsew SmartServo-NP is an automatic needle positioning motor which saves you tons of time and effort while sewing. This powerful and versatile motor will automatically lift the needle at the end of a seam, or automatically leave it in the bottom position. This will eliminate the need to constantly turn your handwheel to position your needle.
At 1HP and 800W, The SmartServo-NP will help your machine power through thick leather at any of the 16 adjustable speed settings. Additionally, a speed reducer is used in combination with the SmartServo-NP motor for added power and speed control. This system is ideal for beginner, intermediate and expert sewers as well.
ALL EXCLUSIVE TO THE TECHSEW 5100 SPECIAL EDITION!
Triple Feed - Walking Foot (needle feed + alternating presser feet + bottom feed)
1" Presser foot clearance
Sews from 6oz all the way up to 7/8" thick
16.5" Cylinder bed
Equipped with Techsew SmartServo-NP motor and speed reducer to sew at slow & controlled speeds - great for novice, intermediate and professional sewers
Reverse stitch - for reinforcing stitches
12 inch heavy duty flywheel
Reinforced steel pedestal style table with adjustable height (sew standing up or sitting down)
Includes: Complete table with casters, SmartServo-NP motor, speed reducer,TS-28 LED lamp, TS-5 LED stitch light, TLG laser guide, swing down roller guide, flatbed table attachment, 3 pkgs of Organ diamond point needles,8 bobbins, thread lube pot, left toe foot, double toe foot, center foot, smooth blanket foot set, 1 lb. (16oz) cone of thread, oiler, instruction manual, repair tools, thread clipper.
Stitch length adjustment up to 11mm (7/16")
Uses thread sizes 69 to 415
Uses needle sizes 18 to 27
FREE setup & instructional DVD included!
Includes Limited Lifetime Warranty and FREE technical support for the life of your machine
Machine comes pre-threaded, oiled, adjusted and READY TO SEW
Needle sizes: 18 to 27
Thread sizes: 69 to 415
Presser foot clearance: 1"
Sewing capacity: 6oz to 7/8" thick
Cylinder bed length: 16.5"
Maximum stitch length: 11mm
Techsew SmartServo-NP motor: 800W, 1HP, 110V, 300 to 1800RPM, 16 speed settings with bright LED display, completely silent when idle and reduced noise during operation. The most POWERFUL servo motor in the industry.