Members Silverd Posted March 14, 2022 Members Report Posted March 14, 2022 Inspired by a commissioned project for a manbag, this version is an attempt to soften the edges and improve the refinement. Looking for opinions as I've only made one before. Thought I should probably carry this one for a while to see what I learn Silverd Quote
Members Mulesaw Posted March 14, 2022 Members Report Posted March 14, 2022 Looking good. My only concern is the metal "feet" on the bag. A bag of this size will often be put on a table or a desk, and if it is a polished surface, chances are that those feet are going to leave some marks. I guess that if the feet were made out of leather, in theory some small grits of sand or stone could embed in them as well, if the bag was put on the ground. However this doesn't look like a bag that you'd put down at e.g. a bus stop, so that might not be a problem. Brgds Jonas Quote
Members Spyros Posted March 14, 2022 Members Report Posted March 14, 2022 On 3/14/2022 at 1:01 AM, Silverd said: Looking for opinions as I've only made one before. Expand I always have opinions :D Overall opinion: I love it, it looks rigid and durable like an old Swiss army map satchel but at the same time with luxury touches like the turned or polished edges. I can't quite figure out what you did with the strap attachments but it's a great idea, I find what often happens in other bags is the strap keeps hitting the top flap and ends up bending and damaging it over time (particularly any edge finish on the flap would be ruined within days). The way you've done it it keeps the straps further out and clear from the flap which is great. Now since you've made more room for the flap maybe you could take that opportunity and make the flap a little wider, it would help it sit better over the bag and cover the openings, and would give you some room to make those two folds you made. Kind of like this (obviously a totally different bag and softer leather, just look at the flap design) I'd also probably lose the feet, instead I would consider stitching the bottom the other way round, if you know what I mean? Turn the bottom the other way with the edges facing down and then stitch. You lose a tiny bit of interior space but you get a nice, rigid bottom that helps the bag stand and doesn't make this annoying sound when you put the bag on a hard surface. Probably easier to stitch from the outside too. Another option to consider is a simple leather strap and loop closure, it is visually appealing on those tall & narrow bags because it follows the lines of the bag. Like this one. (Or a simple strap and buckle would do the same). What are the rivets on the front, is there an interior pocket? Do you have more photos? Well done anyway, it looks great as it is, just throwing some ideas in case you make another. Cheers SP Quote
Contributing Member Samalan Posted March 14, 2022 Contributing Member Report Posted March 14, 2022 On 3/14/2022 at 2:06 AM, Mulesaw said: Looking good. My only concern is the metal "feet" on the bag. A bag of this size will often be put on a table or a desk, and if it is a polished surface, chances are that those feet are going to leave some marks. I guess that if the feet were made out of leather, in theory some small grits of sand or stone could embed in them as well, if the bag was put on the ground. However this doesn't look like a bag that you'd put down at e.g. a bus stop, so that might not be a problem. Brgds Jonas Expand 20 Years ago I did some work for a company that had 2 custom conference tables made at a cost of 14,000 each the first day they were in a guy walks in and throws his briefcase on the table not good the company had glass fitted to the tops your concern made me think of that the company was Digital Equipment Quote
Members Silverd Posted March 14, 2022 Author Members Report Posted March 14, 2022 On 3/14/2022 at 12:20 PM, Samalan said: 20 Years ago I did some work for a company that had 2 custom conference tables made at a cost of 14,000 each the first day they were in a guy walks in and throws his briefcase on the table not good the company had glass fitted to the tops your concern made me think of that the company was Digital Equipment Expand On 3/14/2022 at 1:01 AM, Silverd said: Inspired by a commissioned project for a manbag, this version is an attempt to soften the edges and improve the refinement. Looking for opinions as I've only made one before. Thought I should probably carry this one for a while to see what I learn Silverd Expand Quote
Members Silverd Posted March 14, 2022 Author Members Report Posted March 14, 2022 Having challenges with reducing image size but managed to attach two more that hopefully show some of the details. That said; thank you for taking the time to respond to my request for feedback. Very meaningful comments and excellent points. I had some fun with the strap and the strap attachment details. I wanted to use those unique yoke connectors and so created flange gussets that poke though the bag from the inside. The intermediate straps are skinny to fit the yokes then transition to a 1" wide main strap via a buckle. The main strap has foam inside to soften the carry. It's subtle but noticeable. The addiition of feet was certainly a big decision that effected the look and function of the bag. Ultimately I consulted with several women who liked keeping their bags off dirty surfaces when setting them down. I do sometimes flip the molded bottom the other way which works but this gives the bag a differen look. I liked the beveled edge at the bottom that the molded bottom creates. Rivets on the front serve to attach a phone slide pocket on the inside. Silverd Quote
Members Silverd Posted March 14, 2022 Author Members Report Posted March 14, 2022 On 3/14/2022 at 2:46 AM, Spyros said: I always have opinions :D Overall opinion: I love it, it looks rigid and durable like an old Swiss army map satchel but at the same time with luxury touches like the turned or polished edges. I can't quite figure out what you did with the strap attachments but it's a great idea, I find what often happens in other bags is the strap keeps hitting the top flap and ends up bending and damaging it over time (particularly any edge finish on the flap would be ruined within days). The way you've done it it keeps the straps further out and clear from the flap which is great. Now since you've made more room for the flap maybe you could take that opportunity and make the flap a little wider, it would help it sit better over the bag and cover the openings, and would give you some room to make those two folds you made. Kind of like this (obviously a totally different bag and softer leather, just look at the flap design) I'd also probably lose the feet, instead I would consider stitching the bottom the other way round, if you know what I mean? Turn the bottom the other way with the edges facing down and then stitch. You lose a tiny bit of interior space but you get a nice, rigid bottom that helps the bag stand and doesn't make this annoying sound when you put the bag on a hard surface. Probably easier to stitch from the outside too. Another option to consider is a simple leather strap and loop closure, it is visually appealing on those tall & narrow bags because it follows the lines of the bag. Like this one. (Or a simple strap and buckle would do the same). What are the rivets on the front, is there an interior pocket? Do you have more photos? Well done anyway, it looks great as it is, just throwing some ideas in case you make another. Cheers SP Expand The cover flap as you point out is a bit narrow. Not sure why it got reduced but I have made adjustments to the pattern that adds a 1/8" to each side. Quote
Contributing Member Samalan Posted March 14, 2022 Contributing Member Report Posted March 14, 2022 On 3/14/2022 at 3:25 PM, Silverd said: Expand Field testing the best possible thing you can do . Very nice job on that bag and turning the bottom over is a great idea. Nice work. Quote
Contributing Member Samalan Posted March 14, 2022 Contributing Member Report Posted March 14, 2022 Love the color what's the finish if you don't mind me asking. Quote
Members Silverd Posted March 14, 2022 Author Members Report Posted March 14, 2022 Fiebings Pro Walnut. I precondition with saddle oil then apply die with spray gun. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.