Members PaulineJessica Posted April 24, 2022 Members Report Posted April 24, 2022 Hello guys my name is Pauline from Indonesia can someone help me with changing this bell knive ive the tried to unscrew it but cant My machine is simaru thanks https://youtube.com/shorts/z-5b9__qf7E?feature=share Quote
RockyAussie Posted April 24, 2022 Report Posted April 24, 2022 Pauline...That has got to be about the most dangerous thing I have seen in a long while. Do NOT hold the bell knife with your hand like that. Please get someone to help you. Get the stronger to use a good quality screwdriver to unscrew the screws while the other holds the shaft at the other end where the belt goes around it. Sometimes an impact screwdriver may be needed but normally it can be done with a good screwdriver and strong hands. Once the screws are taken out a tap with a plastic hammer on the back of the bell could be necessary to get the bell loose. Let me know if you get it as I am doing some video's and a manual one one at the moment. I could do a quick one up for you if need be. Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members mike02130 Posted April 24, 2022 Members Report Posted April 24, 2022 You are turning the screws clockwise. Is that the correct way? Are they reverse threads? Quote @mike02130 Instagram
CFM chuck123wapati Posted April 24, 2022 CFM Report Posted April 24, 2022 rightsy tightsy leftsy loosy the video shows you trying to turn the wrong direction to take out a standard screw. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members PaulineJessica Posted April 25, 2022 Author Members Report Posted April 25, 2022 On 4/24/2022 at 5:13 PM, RockyAussie said: Pauline...That has got to be about the most dangerous thing I have seen in a long while. Do NOT hold the bell knife with your hand like that. Please get someone to help you. Get the stronger to use a good quality screwdriver to unscrew the screws while the other holds the shaft at the other end where the belt goes around it. Sometimes an impact screwdriver may be needed but normally it can be done with a good screwdriver and strong hands. Once the screws are taken out a tap with a plastic hammer on the back of the bell could be necessary to get the bell loose. Let me know if you get it as I am doing some video's and a manual one one at the moment. I could do a quick one up for you if need be. Im desperate.. ive got a technician coming today but my machine still jammed Quote
RockyAussie Posted April 26, 2022 Report Posted April 26, 2022 13 hours ago, PaulineJessica said: Im desperate.. ive got a technician coming today but my machine still jammed Make sure they see your video because I think you have been making the screws tighter. They may need to use an impact screwdriver. Pauline... why are you wanting to take out the bell? It does not look like it has much wear if any. Normally you can get them down to about 25mm before they need to be changed. Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members PaulineJessica Posted April 26, 2022 Author Members Report Posted April 26, 2022 I changed my bell knives because it was chipped by the technician. I have change my bell knives now, but i have a new problem, now i cannot skive properly, the leather wont skive pls see video 2 hours ago, RockyAussie said: Make sure they see your video because I think you have been making the screws tighter. They may need to use an impact screwdriver. Pauline... why are you wanting to take out the bell? It does not look like it has much wear if any. Normally you can get them down to about 25mm before they need to be changed. Quote
Members Constabulary Posted April 26, 2022 Members Report Posted April 26, 2022 feed stone too low or presser foot to high I´d say. Do you have a manual for your skiver Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
RockyAussie Posted April 26, 2022 Report Posted April 26, 2022 (edited) 4 hours ago, PaulineJessica said: I changed my bell knives because it was chipped by the technician. I have change my bell knives now, but i have a new problem, now i cannot skive properly, the leather wont skive pls see video There is quite a bit that does not look right in this video. Why are you not using a guide to start with? Secondly, the edge of the bell knife looks very rough and I would say that has not been through the sharpening process properly. I am concerned that the sharpening stone is not in the correct place for your type of work as well. They can be adjusted to do longer and shorter bevels in the way they sharpen the bell and yours may be way too short. I will take some pictures tomorrow of a few places I would like you to take pictures of to help me see what is wrong. I will try and get a short sharpening video done as well. These machines can take a long time to master as they have a lot of variable adjustments to do what every job you want it to do. Edited April 26, 2022 by RockyAussie Quote Wild Harry - Australian made leather goodsYouTube Channel Instagram
Members PaulineJessica Posted April 28, 2022 Author Members Report Posted April 28, 2022 Is my sharpening stone too high ? Or low quality? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.