Members FrenchMich Posted September 4, 2022 Members Report Posted September 4, 2022 Hello, My work of this weekend. A pair of yokes for reining chaps After drawing, the swivel work External beveling with border Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members FrenchMich Posted September 4, 2022 Author Members Report Posted September 4, 2022 The veiner in scrolls I began by the concave beveling Next Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members FrenchMich Posted September 4, 2022 Author Members Report Posted September 4, 2022 Sorry impossible to go on..I can't uplode other pictures. Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members sbrownn Posted September 4, 2022 Members Report Posted September 4, 2022 That was great. Was that from a pattern you made? Quote
Members Mulesaw Posted September 4, 2022 Members Report Posted September 4, 2022 Looking really good Thanks for taking the time to post clear pictures like this to show the progress and in what sequence the tooling is done. I alwyas get too carried away, so even with my best intentions, I rarely manage to take other than a start and a finsihed picture. I am anxious to se what the yokes will look like completed. Hope you manage to find out how to upload the remaining pictures. Quote
Northmount Posted September 4, 2022 Report Posted September 4, 2022 3 hours ago, FrenchMich said: Sorry impossible to go on..I can't uplode other pictures. You need to reduce file sizes. 1280 x 768 pixels or there abouts is adequate for photos as the screen resolution on most computers is typically less than 100 dpi. See this post for helps and suggestions. Quote
Members FrenchMich Posted September 29, 2022 Author Members Report Posted September 29, 2022 Next convex bevelling Next background, with Barry King 0.45 Bargrounders Next some details with veiners Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members FrenchMich Posted September 29, 2022 Author Members Report Posted September 29, 2022 as you advised me, I resized all my pictures, but i am stuck again Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members FrenchMich Posted September 29, 2022 Author Members Report Posted September 29, 2022 (edited) On 9/4/2022 at 10:14 PM, sbrownn said: That was great. Was that from a pattern you made? Yes of course On 9/5/2022 at 1:25 AM, Mulesaw said: Looking really good Thanks for taking the time to post clear pictures like this to show the progress and in what sequence the tooling is done. I alwyas get too carried away, so even with my best intentions, I rarely manage to take other than a start and a finsihed picture. I am anxious to se what the yokes will look like completed. Hope you manage to find out how to upload the remaining pictures. As soon I can I'll post the following. I you want know more about used tools or otherthing, don't hesitate Mich' Edited September 29, 2022 by FrenchMich tell more Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Northmount Posted September 29, 2022 Report Posted September 29, 2022 16 hours ago, FrenchMich said: as you advised me, I resized all my pictures, but i am stuck again I checked your file sizes and don't see any problem, even with the first ones you uploaded. Maybe something on your end with your browser or your ISP? Sorry I can't test as there is no limit on the size of moderators' uploads. If you have more to post and can't get through, message me and I'll give you an address to email them to, and I will post them for you with your comments. Quote
Members FrenchMich Posted September 30, 2022 Author Members Report Posted September 30, 2022 (edited) For previous picture the used tools are Veiner and shader... some finish with swivel knife And to finish, the lifter Edited September 30, 2022 by FrenchMich Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members FrenchMich Posted September 30, 2022 Author Members Report Posted September 30, 2022 (edited) Today I was able to upload two pictures no more... I'll try tomorrow again Edited September 30, 2022 by FrenchMich Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members FrenchMich Posted September 30, 2022 Author Members Report Posted September 30, 2022 Detail With Antique finish (When I come back the next day it works (for upload pictures...)) Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members JayEhl Posted September 30, 2022 Members Report Posted September 30, 2022 Thank you for the close up picture. It really helped me alot to see the details. Great work. Quote
Members spacedog Posted September 30, 2022 Members Report Posted September 30, 2022 Great step by step progression, and nice use of the bar-grounder tool. Excellent work. Quote
Members TomE Posted September 30, 2022 Members Report Posted September 30, 2022 Beautiful work! I want to see the chaps when finished. Quote
Members FrenchMich Posted September 30, 2022 Author Members Report Posted September 30, 2022 Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members TomE Posted September 30, 2022 Members Report Posted September 30, 2022 Work of art! Thanks for sharing. Quote
Members FrenchMich Posted October 1, 2022 Author Members Report Posted October 1, 2022 Thank you TomE Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Members Mulesaw Posted December 6, 2024 Members Report Posted December 6, 2024 @FrenchMich A bit late, but the yokes and chaps look absolutely gorgeous. Attaching the back belt with those "conchos" really look good. Not that I am opposed to attaching them with braiding, but it just looks so elegant with the silver buttons. There is a potential western chap build in my future to a friend of my oldest son, so I am tempted in trying to do just a little bit of carving thanks to your excellent tutorial. Thanks for taking the time to take the pictures and explain the process. Brgds Jonas Quote
Members DoubleKCustomLeathercraft Posted December 30, 2024 Members Report Posted December 30, 2024 On 9/28/2022 at 10:00 PM, FrenchMich said: as you advised me, I resized all my pictures, but i am stuck again I run into the same problem. I dunno if there's a daily limit or something on top of size. Either way, come back the next day and continue on. Quote
Members DoubleKCustomLeathercraft Posted December 30, 2024 Members Report Posted December 30, 2024 That turned out beautiful. This style of carving is always a struggle for me. I hope to be there someday Quote
Members FrenchMich Posted January 8 Author Members Report Posted January 8 I don't come here often, thank you very much Quote To pass for an idiot in the eyes of an imbecile is a voluptuousness of fine foodie. Georges Courteline
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.