Members milkman Posted January 30, 2023 Members Report Posted January 30, 2023 Hello everybody I made my mind purchasing a Juki 441 clone. Also, based on the stuff I want to sew with it I am intending to get this type of presser foot. Attached picture. The idea is to sew the bag gusset with support from the right side. I'm not sure if I am doing the correct choice, well probably I'll need anyways different types of feet in the future. But some feedback regarding this type of foot is appreciated. Also, is there something such as a flat needle plate for a cb3200? Thank you! Great community! M. Quote
RockyAussie Posted January 30, 2023 Report Posted January 30, 2023 That setup will be fine for doing the bag gussets though you may want to get an open toe center foot for better vision. We make a narrow needle plate set for the cb3200 if that helps and you can read some stuff about it in this post if you like If you would like a set pm me here and I will get back with a price delivered. I would need to know what country you are are in to work out the postage cost part. Quote
Members milkman Posted January 30, 2023 Author Members Report Posted January 30, 2023 @RockyAussie thanks for the feedback! Yes I will pair it with the open walking foot but couldn't find a photo with both. On my juki flatbed I modified/cut the walking foot just for this reason, to see where the needle goes in. Better control of the stitching especially dealing with changing layers. I already read about the plates you are doing, so that one is on my list. First I'll get comfortable with the machine and the first thing I will get is your slimmer opening plate and dog. I'll send a pm with the address for a quote. Thanks again! M. Quote
RockyAussie Posted January 30, 2023 Report Posted January 30, 2023 Your welcome, here is a pic where I am using the open toe foot with the right paddle foot. Quote
Members milkman Posted January 30, 2023 Author Members Report Posted January 30, 2023 That looks so good! I'm guessing that you have the slim plate there as well!! Will send the message asap haha. Quote
Moderator Wizcrafts Posted January 30, 2023 Moderator Report Posted January 30, 2023 7 hours ago, RockyAussie said: here is a pic where I am using the open toe foot with the right paddle foot. Can I see a close up of the paddle foot? The ones I've had for over a decade stick way out in front of the inside foot and miss turns. Yours looks shorter and more useful on curves and turns. Where'd you get yours? Quote
Members TomE Posted January 30, 2023 Members Report Posted January 30, 2023 (edited) @Patrick1 Patrick Hennigan makes flat plates with dogs of various widths. https://heprecision.com/ . He also has an interesting narrow presser foot set as an alternative to an in-line foot. Edited January 30, 2023 by TomE Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.