Members SUP Posted April 3 Author Members Report Posted April 3 @dikman exactly! But let's see, who knows? I get a load of it every fortnight or so. It probably stinks because of attached proteins. Using clear, pure fat might be different. We can always try. Quote Learning is a life-long journey.
AEBL Posted April 10 Report Posted April 10 (edited) For stinky oils - you could try "sparging" it ... get an aquarium bubbler (little pump with a stone at the end that emits tiny bubbles) and run that for a while. I know for less viscous things, say in the olive oil area of viscosity, you can remove smells a bit. Sometimes it takes a day or so, and for shmaltz (chicken fat), you might have to sparge it in a slow cooker. I have only sparged less viscous things like Copper Chloride etchant ... you might also have to worry about foam, so if you try it, don't try it with a full container ... try half full for starters. Edited April 10 by AEBL one more thing Quote
Members SUP Posted May 20 Author Members Report Posted May 20 On 4/10/2025 at 9:04 AM, AEBL said: For stinky oils - you could try "sparging" it ... get an aquarium bubbler (little pump with a stone at the end that emits tiny bubbles) and run that for a while. I know for less viscous things, say in the olive oil area of viscosity, you can remove smells a bit. Sometimes it takes a day or so, and for shmaltz (chicken fat), you might have to sparge it in a slow cooker. I have only sparged less viscous things like Copper Chloride etchant ... you might also have to worry about foam, so if you try it, don't try it with a full container ... try half full for starters. I'm sorry for the delayed response. I just made a batch of dog food and I do not have sufficient fat to 'sparge' it. I'll probably put it off until winter. It is hot here so I do not want to keep it indoors. Outdoors, in the heat, it will really stink. On an aside, I discovered that wax really darkens leather, even more than any of the oils. In another thread, I have explained how I dipped a piece of split that I normally use as a pounding board, into melted wax and dried it. I use this as a pounding board now - hard enough but does not damage the tips of my tools and the wax constantly lubricates it. The leather is hard and so much darker, it is now a dark medium brown. it started off the light color of veg tanned leathers. Quote Learning is a life-long journey.
Contributing Member fredk Posted May 20 Contributing Member Report Posted May 20 10 minutes ago, SUP said: I'm sorry for the delayed response. S'alrite. I've done nothing lately. But I've cooked a chicken and I've plenty of fat 12 minutes ago, SUP said: . . . In another thread, I have explained how I dipped a piece of split that I normally use as a pounding board, into melted wax and dried it. I use this as a pounding board now - hard enough but does not damage the tips of my tools and the wax constantly lubricates it. This was one of the ways that leather armour was made, from the early Roman times up to the 19th century. see cuir bouilli, Quote Al speling misteaks aer all mi own werk..
Members SUP Posted May 20 Author Members Report Posted May 20 26 minutes ago, fredk said: This was one of the ways that leather armour was made, from the early Roman times up to the 19th century. see cuir bouilli Oh! Nice. New use for old techniques. 28 minutes ago, fredk said: S'alrite. I've done nothing lately. But I've cooked a chicken and I've plenty of fat I have a little, flavoured with pumpkin and carrots, asafoetida and turmeric, and garlic. So I cannot use it. I forgot and added all the ingredients to the chicken when cooking it. Next time, I'll try to remember. Quote Learning is a life-long journey.
Contributing Member fredk Posted June 6 Contributing Member Report Posted June 6 I meant to post this a couple of weeks ago I got a piece of veg tan and smeared it in chicken grease/fat. Not too much, just a good coating with excess wiped off. It didn't last a week! It was really rotten to smell and so sickening I didn't bother to see if the leather was affected by the rancid chicken grease/fat Meanwhile, back at the ranch; No changes to any of the other test pieces, except a slight lightening (bleaching out) of the darker pieces I'll do a 'proper' report at the weekend Quote Al speling misteaks aer all mi own werk..
Members SUP Posted June 6 Author Members Report Posted June 6 (edited) I wonder whether that (the smell) happens because the chicken grease is not purified? Everything else that we have used is purified with no proteins remaining. It is, after all the proteins that putrefy and cause that awful smell. I wonder if there is a way to purify chicken fat. I think I will put off that experiment until I learn more about it. Edited June 6 by SUP Quote Learning is a life-long journey.
Members dikman Posted June 6 Members Report Posted June 6 Told you so! I have chicken fat in my BBQ at the moment, now that winter has started it solidifies into a nice-looking fat but as soon as the weather warms up it goes runny like water. It also attracts the European Wasps, which have difficulty swimming in it! It's the last thing I would ever put on leather (thinks: pictures person with leather purse running down the street chased by hungry wasps! ends thinks). Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members SUP Posted June 6 Author Members Report Posted June 6 @dikman you're right. Plain chicken fat is not purified and has things other than fats in it. So putrefaction and the accompanying stink happens. But what about absolutely purified chicken fat? Although I have no idea how I can do that, unless I cook the fat until all the non-fat components get fried and turned to coal and I strain the oil and use that. Quote Learning is a life-long journey.
Members dikman Posted June 6 Members Report Posted June 6 You're talking about the same process I use to make tallow (I use a slow cooker over several hours). It might work, maybe, but I'm not interested enough to try it. I think either you or fred should give it a go, seeing that this is primarily your thread () and then we'll all know. Pictures come to mind of SUP leaning over a big cauldron of simmering chicken fat, stirring regularly. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.