Frodo Report post Posted September 26, 2023 Rex-26-188 needle DPX17D 135/17. 125/20 Thread. 210. I think? 3 strand why is my machine sewing a nice stitch on 7 oz veg but skips stitch’s when anything is thicker? It has sewn it before with out issues i have changed the needle and have attempted to readjust tension. This is driving me nuts Quote Share this post Link to post Share on other sites
Northmount Report post Posted September 26, 2023 Increase the pressure on the presser foot. The leather may be lifting up and losing the loop so the hook can't catch it when you are on thick or harder leather. Happened to me last week! 1 hour ago, Frodo said: skips stitch’s when anything is thicker Quote Share this post Link to post Share on other sites
Frodo Report post Posted September 26, 2023 Ok Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted September 26, 2023 Try a different leather point shape than diamond. Sometimes a slicing wedge performs better in dense leather. This would also let you move up one needle size if tight holes are the problem. Little known factoid: Schmetz make System 134-35 needles in "S" point, which is an inline slicing wedge. They are about 1mm shorter than System 135x16/17. Sometimes they work with out any needle bar adjustment. Otherwise, lower the bar 1mm when using 134-35. Quote Share this post Link to post Share on other sites
Burkhardt Report post Posted September 27, 2023 14 hours ago, Wizcrafts said: Try a different leather point shape than diamond. Sometimes a slicing wedge performs better in dense leather. This would also let you move up one needle size if tight holes are the problem. Little known factoid: Schmetz make System 134-35 needles in "S" point, which is an inline slicing wedge. They are about 1mm shorter than System 135x16/17. Sometimes they work with out any needle bar adjustment. Otherwise, lower the bar 1mm when using 134-35. Aren't the 135x17 needles for fabric? And wouldn't a size 22 needle be a minimum for 207? Or am I off with the numbers for that machine? Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted September 27, 2023 5 hours ago, Burkhardt said: Aren't the 135x17 needles for fabric? And wouldn't a size 22 needle be a minimum for 207? Or am I off with the numbers for that machine? Should use #23 for 207,#22 is for 138 Quote Share this post Link to post Share on other sites