Jamesgentry270 Report post Posted December 4, 2023 I’m not sure of the model but seller says it’s good running shape despite the rust, but does anyone know anything about this machine? And do you think it would sew wallets or belts? Thanks for any info! Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted December 4, 2023 (edited) No,get a used Singer 111w,Consew 225,226,Juki 562 or 563 & you'll be alot happier & do a better job of sewing than this one can.This was made to sew clothes using thin thread. Edited December 4, 2023 by CowboyBob Quote Share this post Link to post Share on other sites
Jamesgentry270 Report post Posted December 4, 2023 5 minutes ago, CowboyBob said: No,get a used Singer 111w,Consew 225,226,Juki 562 or 563 & you'll be alot happier & do a better job of sewing than this one can.This was made to sew clothes using thin thread. Thanks brother! Im new to the world of machines I’m just throwing darts at the wall! Thanks for the list of machines I’ll start hunting! Quote Share this post Link to post Share on other sites
Jamesgentry270 Report post Posted December 5, 2023 On 12/4/2023 at 12:58 PM, CowboyBob said: No,get a used Singer 111w,Consew 225,226,Juki 562 or 563 & you'll be alot happier & do a better job of sewing than this one can.This was made to sew clothes using thin thread. I am going to check out a 111w153 Friday but do you know what is the biggest thread and needle that machine can handle? Or what I would need? Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted December 6, 2023 1 hour ago, Jamesgentry270 said: I am going to check out a 111w153 Friday but do you know what is the biggest thread and needle that machine can handle? Or what I would need? I have a 111w153. I mostly use #69 or #92 thread in it. But, I occasionally thread it with #138, which is the maximum it can practically handle. This calls for a #23 needle, which requires a hell of a lot of torque to punch it through 1/4 inch of veg-tan leather. Quote Share this post Link to post Share on other sites
Jamesgentry270 Report post Posted December 6, 2023 1 hour ago, Wizcrafts said: I have a 111w153. I mostly use #69 or #92 thread in it. But, I occasionally thread it with #138, which is the maximum it can practically handle. This calls for a #23 needle, which requires a hell of a lot of torque to punch it through 1/4 inch of veg-tan leather. Is there anything I need to do to give it that torque? So #23 needle and #138 thread is as big as I need to go? Thanks wizcrafts Quote Share this post Link to post Share on other sites
nylonRigging Report post Posted December 6, 2023 On 12/4/2023 at 9:54 AM, Jamesgentry270 said: but seller says ..." it’s good running shape despite the rust ", LOL... The machine in the Pic. looks like someone Pee'd on a old Penny . . Quote Share this post Link to post Share on other sites
Jamesgentry270 Report post Posted December 6, 2023 3 hours ago, nylonRigging said: LOL... The machine in the Pic. looks like someone Pee'd on a old Penny . . You’re not wrong!! Haha Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted December 7, 2023 On 12/5/2023 at 8:32 PM, Jamesgentry270 said: Is there anything I need to do to give it that torque? So #23 needle and #138 thread is as big as I need to go? Thanks wizcrafts Yeah; get a 2:1 or 3:1 speed reducer. Quote Share this post Link to post Share on other sites
