Members GerryR Posted January 25, 2024 Members Report Posted January 25, 2024 I don't usually need a chest holster but wanted to have the option when woods walking (Black bear and now mountain lions). I built this harness so I can take my belt holster and mount it for chest carry. Not the best job I ever did but it works and might give others some ideas. I used web belts and harnesses from a tool bag and from a weed-wacker; the leather chest portion I made. No need to have a separate dedicated chest holster. Quote
Members DieselTech Posted January 25, 2024 Members Report Posted January 25, 2024 Looks good. Nice work. I like it. Quote
Members Hags Posted January 26, 2024 Members Report Posted January 26, 2024 Nice job and a very good idea. After a few recent posts showing very nice adaptable chest rigs for cross draw holsters, I have been kicking around this very thought. Al my hip holsters have a 15 degree forward cant. This should adapt nicely for that. Thanks for the idea! Quote
Members GerryR Posted January 26, 2024 Author Members Report Posted January 26, 2024 (edited) Thank you both for your comments. As I stated, I used on-hand straps that were collecting dust for the harness. If I was starting from scratch, I would approach it differently; the holster carrier would stay approximately the same, but I would approach the harness part differently, especially where it attaches to the holster carrier. @Hags - I would like to see what you come up with. Once an idea gets started, it is amazing how many variations come out of it! Edited January 26, 2024 by GerryR Quote
Members Hags Posted January 27, 2024 Members Report Posted January 27, 2024 I'll be sure to post. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.