Palosanto: A thing of beauty.

[DieselTech]

Guys & gals I decided to try a couple Palosanto bevelers out. I have only made 1 cut each with them & I must say these tools are exquisite! 

Cost after receiving them. Who cares! They are that nice. 

I already decided I'm ordering the rest to complete the set I want. 

Superbly Nice!

[MarshalWill]

I've never used them. Good to know you are pleased with what they do. Maybe one day I'll give them a try.

[DieselTech]

44 minutes ago, MarshalWill said:

I've never used them. Good to know you are pleased with what they do. Maybe one day I'll give them a try.

I've went thru a couple cheap bevelers from amazon before I learned a couple sharpening  techniques. 

I read a few reviews & watched some vids, & it seem like they all had a glowing review about them. 

I've been slowly trying to update my cheaper tools, since I've dived a bit deeper in the hobby. 

I'm really happy with the purchase. I highly recommend. 

Thanks. 

[MarshalWill]

30 minutes ago, DieselTech said:

I've went thru a couple cheap bevelers from amazon before I learned a couple sharpening  techniques. 

I read a few reviews & watched some vids, & it seem like they all had a glowing review about them. 

I've been slowly trying to update my cheaper tools, since I've dived a bit deeper in the hobby. 

I'm really happy with the purchase. I highly recommend. 

Thanks. 

I've used beveling tools of other types but never these. I will definitely remember to not go to the cheap side if I get one. Thanks for the information.

[bruce johnson]

Here is a "be careful" word of warning. Those Palosanto French edgers are very sharp (good thing), they can also very be very brittle (not always a good thing). I have had several through here, some bought sets and after the second or third broken one they decided to bail on the rest. Some sent me the broken ones to try to fix. I don't generally do that for most stuff I haven't sold.  A couple broken ones were dropped. Most tools survive a fall, but granted not all do no matter who made them. The most common way these broke was in use. They don't seem to readjust angles in mid stream all that well. The edges are thin enough they want to follow the plane they are in. A little mild prying action from trying to do a "scoop skive" or changing the angle because "Oh crap, I'm getting a little deep" and they can snap a chunk out of the blade. I have done that personally testing some as well. t I haven't tried the drop test because I believe they folks who sent the rest to me. Make friends with these tools. 

[DieselTech]

1 hour ago, bruce johnson said:

Here is a "be careful" word of warning. Those Palosanto French edgers are very sharp (good thing), they can also very be very brittle (not always a good thing). I have had several through here, some bought sets and after the second or third broken one they decided to bail on the rest. Some sent me the broken ones to try to fix. I don't generally do that for most stuff I haven't sold.  A couple broken ones were dropped. Most tools survive a fall, but granted not all do no matter who made them. The most common way these broke was in use. They don't seem to readjust angles in mid stream all that well. The edges are thin enough they want to follow the plane they are in. A little mild prying action from trying to do a "scoop skive" or changing the angle because "Oh crap, I'm getting a little deep" and they can snap a chunk out of the blade. I have done that personally testing some as well. t I haven't tried the drop test because I believe they folks who sent the rest to me. Make friends with these tools. 

Yeah I had a few guys say they broke some of the french skivers by dropping them. 

Boy do they cut nice thou, I did notice tonight that if you try to change angle mid skive these dont like it.

Thanks for the heads up on being careful with them. 

I figured it was time to start buying some nicer tools. I'm a diesel technician soo I already got a tool problem. Lol

The leather working is my second venture in life & I'm enjoying it. 

[MarshalWill]

Much like getting your first Snap-On screwdriver, huh?

[DieselTech]

1 hour ago, MarshalWill said:

Much like getting your first Snap-On screwdriver, huh?

Yes it is! I remember getting my 1st set, then trading them up for the latest & greatest comfort grip. 

[jcuk]

7 hours ago, bruce johnson said:

Here is a "be careful" word of warning. Those Palosanto French edgers are very sharp (good thing), they can also very be very brittle (not always a good thing). I have had several through here, some bought sets and after the second or third broken one they decided to bail on the rest. Some sent me the broken ones to try to fix. I don't generally do that for most stuff I haven't sold.  A couple broken ones were dropped. Most tools survive a fall, but granted not all do no matter who made them. The most common way these broke was in use. They don't seem to readjust angles in mid stream all that well. The edges are thin enough they want to follow the plane they are in. A little mild prying action from trying to do a "scoop skive" or changing the angle because "Oh crap, I'm getting a little deep" and they can snap a chunk out of the blade. I have done that personally testing some as well. t I haven't tried the drop test because I believe they folks who sent the rest to me. Make friends with these tools. 

A Skirt Shave/French Edger breaking in use use is not a good thing at all so heed Bruces warning. All leather cutting tools should be respected but Skirt Shaves/French Edgers particularly so these have to be good and sharp well stropped before you use these, one that is not can at best ruin your work or at worse inflict a lot of damage to you so be careful when using this tool. Pretty is not always nice.

Hope this helps

JCUK 

[MarshalWill]

6 hours ago, DieselTech said:

Yes it is! I remember getting my 1st set, then trading them up for the latest & greatest comfort grip. 

There's no substitute for quality tools. They allow you to do your best possible work. That's true for any undertaking. Leather tools seem to be particularly so.

Oh, yeah, I still have my first one. It's had a few tips replaced but I still have it.

Edited February 16, 2024 by MarshalWill