Jump to content

Recommended Posts

I just picked up an IMMACULATE Singer 29k-71 and the feed foot won't pull the work through. If I pull it, it goes to the appropriate length and stops, but there is no power going to make the foot pull the work through. Any help is appreciated. 

 

 

Share this post


Link to post
Share on other sites
6 hours ago, Dannyofalltrades said:

I just picked up an IMMACULATE Singer 29k-71 and the feed foot won't pull the work through. If I pull it, it goes to the appropriate length and stops, but there is no power going to make the foot pull the work through. Any help is appreciated. 

 

 

@Dannyofalltrades

Your video was uploaded in a file format that's not recognized by our board software and cannot be displayed. Please re-save the photo as a .jpg or a .png and re-upload it. Use a small enough resolution to keep the file size under the forum limit. I find that 1:1 and 3x4 produce suitable small size photos.

Share this post


Link to post
Share on other sites
8 hours ago, Dannyofalltrades said:

I just picked up an IMMACULATE Singer 29k-71 and the feed foot won't pull the work through. If I pull it, it goes to the appropriate length and stops, but there is no power going to make the foot pull the work through. Any help is appreciated. 

 

 

Above the foot, there should be a stitch length screw/clamp. It slides up and down the feed bar. All the way down to full feed, up for zero. 

Share this post


Link to post
Share on other sites

Hello, just signed up.

anyway I have a Singer 29k62 that I picked up that is having the same problem!  Did you ever find a solution?  

Share this post


Link to post
Share on other sites
2 hours ago, Rallekcm said:

Hello, just signed up.

anyway I have a Singer 29k62 that I picked up that is having the same problem!  Did you ever find a solution?  

The O.P. hasn't responded since he posted this, on April 14, 2024. I suggest that you start your own topic. If you upload photos, keep them as small as possible and in .jpg format.

Share this post


Link to post
Share on other sites

the stitch length clamp is not on properly.  Will not feed because of that.

glenn

Share this post


Link to post
Share on other sites

I will start a new thread as suggested above, I am for sure missing the little wedge that slots into the back of the stitch length clamp on the foot leg(?).  However when I feed it through by hand stitches are so numerous that it basically perforated cardboard for easy tearing.  May start making my own stamps!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...