Members stampingdelight Posted April 25, 2024 Author Members Report Posted April 25, 2024 42 minutes ago, BlackDragon said: I made a hat a while back. I used galvinized wire for the brim so I could shape it. I made the crown a little bigger than I needed so I could make a leather band on the inside to size it better. I used several coats of undiluted resolene to seal it. The only real regret was I made it to round. on the wire for the brim did you hand sew or use sewing machine Quote
Members BlackDragon Posted April 26, 2024 Members Report Posted April 26, 2024 I hand stitched it all. I punched the holes in the brim then just pushed the needles through the thin leather I used for piping while feeding the wire. Quote
Members stampingdelight Posted April 26, 2024 Author Members Report Posted April 26, 2024 12 hours ago, BlackDragon said: I hand stitched it all. I punched the holes in the brim then just pushed the needles through the thin leather I used for piping while feeding the wire. very nice Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.