Exacto Knife Question

[MasonLikesLeather]

59 minutes ago, SUP said:

@MasonLikesLeather These days I use mainly a box cutter and a round knife for cutting leather. A round knife works very well for curves. It take just a little bit of practice but is worth it because of the ease with which you can cut beautiful curves. That will come a little later though, unless you want to make anything with curves right at the start. Do check on this forum before you buy one though.

As @DJole says, a strop as well. I forgot that earlier. I made mine, initially with a strong piece of cardboard onto which I stuck an old leather belt and rubbed jeweler's rouge on. Since then, I've cut a piece of leather to make one.

Okay!

4 hours ago, DJole said:

I have 2 Xacto knives, for lighter leather. I used these for a few years, until I realized that other tools are better suited for some tasks.  

• For instance, I have a craft knife (snap-off blade) and a box cutter, for thick leather, and a rotary cutter which is excellent for soft leathers. The "push" cutting of my rotary cutter really helps me keep straight lines.  
• I use Tandy's heavy leather shears for some things, especially lighter leathers with complex curves.
• I have recently been using my Japanese style skiving knife to cut straight lines and trim corners, after watching many videos of people doing that. And to skive with, of course! But not all leathers-- some I skive with my French skiver. I don't even know where my Safety skiver is at the moment, since I don't use it anymore. 

Most people have a variety of knives for different purposes! It really depends on the project.

Probably just as important, though, are the following:

1.  Keep the knives sharp! Before starting a new project, replace or sharpen the blades. Learn how to sharpen a blade and how (and how often) to use a strop--it really makes a difference!
2.  Have a good cutting mat underneath. Cutting mats with grid lines are very useful for making sure lines are parallel.
3.  For straight lines, use a metal ruler to guide your cuts. A cork-backed ruler is what I use.

But don't go out and buy all the knives right away! 

Thanks!

[BlackDragon]

Here's thread started in Sept about knives.

 

[MasonLikesLeather]

3 hours ago, BlackDragon said:

Here's thread started in Sept about knives.

 

Okay, thanks!

[MarshalWill]

2:45-3:34 shows a great use for an X-acto knife. I use his method more than any other for cutting complex shapes from bridle leather.

A good holster making video.

[SUP]

@MarshalWill That is a  very interesting video. Can't wait to get a piece of carpet to try it.

[MarshalWill]

When I saw that part of the video, it changed my thinking on X-acto knives. His method works great.