What is this clicker press worth?

[stennes]

Any ideas would help, relative passed and I have know idea about this beast?

[ljk]

That is a USMC model c or a version.  The manual is available online. Was commonly used for cutting soles.  Not allowed in factories for years because of inadvertent  double clicking when flywheel and clutch get hot. Great hobby machine. Perfect machine for me because I make my own dies out of steel rule.  Usually runs on 220 single phase one HP motor. 

The machine will jam if depth is set wrong, you need big monkey wrench to back off flywheel. 

As a parts machine $500 or less.  In good working order  $1000-$1500

[stennes]

3 hours ago, ljk said:

That is a USMC model c or a version.  The manual is available online. Was commonly used for cutting soles.  Not allowed in factories for years because of inadvertent  double clicking when flywheel and clutch get hot. Great hobby machine. Perfect machine for me because I make my own dies out of steel rule.  Usually runs on 220 single phase one HP motor. 

The machine will jam if depth is set wrong, you need big monkey wrench to back off flywheel. 

As a parts machine $500 or less.  In good working order  $1000-$1500

Thank you very much for input, that is great info.