not squashing detailed carving in a stitching pony

[LakeOtter]

Hello and thanks in advance!

I am practicing to make pieces that can be small or narrow (hat patches, hat bands, belt) but that have detailed work including figure or pictorial.

You spend hours of time and effort on depth and 3D relief for animals and flora with fine textures etc., you know...

But then even master Al Stohlman's "The Art of Hand Stitching Leather" front cover shows a tooled belt clamped right there under the wooden vice grip of a stitching pony.

 I just feel like it wouldn't take that much pressure to at least slightly compromise certain, painstaking work. People always talk of accidentally, barely nicking or scratching their work with xyz tool. I do not want to even slightly compress the shoulder of a bear or something, and almost considered a Speedy Stitcher, but I want to learn quality-with-efficiency, for an indefinite commitment. And stiches look great even when not needed structurally.

Are there any tips you can think of other than:

1) Let the work dry good and hard before clamping into the pony

2) clamp it just tight enough not to shift or wiggle, but do not over-tighten

I see some ponies have material buffering the piece from the direct wood jaws; maybe I can try some different rubbers, leathers as a buffer?   I thought of felt but maybe it allows movement too much unless too tight....?

Any experience or thoughts here are appreciated,

Jeff in FL

Edited Saturday at 02:53 PM by LakeOtter

[BlackDragon]

The important things are your #1 & #2. Veg tan should be completely dry before clamping for stitching and it shouldn't move while in the clamp.

With that said ponies should have something in between the wooden clamps, preferably something softer that the work piece. I use a couple pieces of 3oz English bridle on each side (not glued together). The English bridle will comform to the tooling when snug.

When the work piece is in the clamp you don't have to use a lot of pressure to do the stitching, if you are your holes may be to small. Also make sure when you're stiching you aren't pulling the piece so it moves towards you or away from you. The pressure should go to the left and right.

 

[AlZilla]

Can you sew your small items without a stitching pony?  I don't care for them.

[chuck123wapati]

Pretty much what you said!! put leather on the jaws and remember it is meant to hold as an extra hand would, not squish the life out of it. You're not intending to do anything but hold it in place while you work, so don't over-tighten it.  Also, most times, you can find areas on your project that have no tooling to apply the clamp. Most important to remember is you're the brain part of the tool, just don't put it where it will ruin your work.

[LakeOtter]

23 hours ago, AlZilla said:

Can you sew your small items without a stitching pony?  I don't care for them.

Thanks for the replies, guys!

AlZilla -- I don't have much stitching experience at all with leather. I've either glued and/or run leather lace through big, punched holes up one side of an easy, folded-over holster build. Just that kind of stuff so far. Lots of crafting and shop experience in other ways, so I'm no noob at craftsmanship in general. I pick up on stuff fast. 

How do you like to stitch without a pony? Are you using the two-handed saddle stitch method or a Speedy Stitch or some other method?

I do think about maybe stitching a premium, hand-tooled hat patch directly to a trucker hat (not a $5 laser engraved one, or one stamped with one big stamp) instead of just gluing it (esp. when you want at least decorative stitch anyway) and am trying to learn the different options out there. The book I got is pretty much one method, I think (saddle stitch with pony). The Speedy Stitch thing gets looked at as unprofessional, it seems, but I want to know my options. And I guess you can do the same thing as a Speedy Stitch just with an awl and needles, just a different stitch(?).

I know people often advise not over-equipping oneself as a "beginner" at any one thing (like stitching leather), but I also go through long, dry periods of not having the money to buy much of anything but food and meds, so I want to get most of whatever I might need for the next long while (while I have a little bit of cash now, left) so I don't need something new when I'm broke, lol. Right now I'm looking at stitching supplies like awls, forks, needles...holder, etc.

Thanks for your input!

(that goes for everybody)