Interesting "441 Style" Presser Feet for Singer 111w, 153w and similar like 341, 227R and so forth

[amuckart]

Thank you, that’s very relevant to my interests. 

[Constabulary]

seems I´ll get my order within the next few days.... curious me is 😉

[toxo]

On 10/17/2025 at 8:34 PM, Uwe said:

My US based order: 

 

Mine was £25.78 in the UK.

[CdK]

My order is on the way. I preferred to get complete sets, that's the way I roll, as I have needed to modify/finish pieces in the past.

 

[Constabulary]

They have arrived! Took 10 days from China to Germany and no extra charge.

I´m using them on my 111G156.

First glance.... The "fork" foot set works fine and line well with my feed dog - no issues. The right toe foot is touching the thread guide but the one I have installed is not the "original" one I have one from a 211 so that is on me. The left toe foot does not fit into the foot bar. The end that goes into the foot bar fork is a bit thicker than on the other feet It also has a different finish, the other feet fit well. Maybe I´ll do some grinding but I´ll check with the seller first.

The scissors are sharp a hell. I ordered them for just having a pair in my tool box. REALLY SHARP!!!

Edited Monday at 12:27 PM by Constabulary

[Constabulary]

cannot edit anymore. Here are some pictures:

 

[toxo]

On 10/26/2025 at 4:44 PM, toxo said:

Mine was £25.78 in the UK.

Seems I spoke too soon. Had a card through the door today telling me that the sender hadn't paid enough postage. I've had to pay another £5.50.

[Constabulary]

I'll get a new left toe foot but have to place a new order - thats okay for me considering the fairly low price of the feet. They for sure have something I could use.

I also found some interesting cheap feet for the Adler 67, 167, 68, 168, 69, 169, 267 and so forth "line" in their store:

https://de.aliexpress.com/item/1005008687919538.html

nutin for me Singer Idjit but looks like a good deal for the Adler folks 😉

Edited 17 hours ago by Constabulary

[CdK]

On 10/27/2025 at 8:41 AM, Constabulary said:

cannot edit anymore. Here are some pictures:

 

@Constabulary Variations like what you found seems to be somewhat common with some items I got from the orient in the past. Also the lack of good finish on parts, such as presser feet for the 801 bell skiver, have been a minor irritation but not uncommon even from touted & expensive US manufacturers/resellers. I'm fortunate that I have the tools and skills to finish or modify items to get them to work properly. BTW, the items I ordered are now in country and should arrive in about a week.