Cb341 stitching question

[Tommy217xxx]

Here’s a video of it happening.

[kgg]

1 hour ago, Tommy217xxx said:

Here’s a video of it happening.

Your threading of the top thread around the tension discs is incorrect, refer to your manual for the correct threading.

kgg 

[Tommy217xxx]

6 hours ago, kgg said:

Your threading of the top thread around the tension discs is incorrect, refer to your manual for the correct threading.

kgg 

I tried to follow the manual but the instructions suck.

[AlZilla]

14 minutes ago, Tommy217xxx said:

I tried to follow the manual but the instructions suck.

I know nothing about this machine. But if I had to make a scientific wild assed guess, it would be this.

[CowboyBob]

When you thread the lower disc you need to go past the little oval window @ the 10:00 position.

Edited Monday at 12:11 PM by CowboyBob

[kgg]

4 hours ago, Tommy217xxx said:

I tried to follow the manual but the instructions suck.

Here is a good threading video for the CB341 starting at about the 8:11 mark for the tension disc. You should really view it from the beginning just to cover off any other potential problems.

kgg

 

[Tommy217xxx]

Just now, kgg said:

Here is a good threading video for the CB341 starting at about the 8:11 mark for the tension disc. You should really view it from the beginning just to cover off any other potential problems.

kgg

 

Thanks kgg. I found her video this morning and it solved my problem. I did watch from the beginning.

[friquant]

[Tommy217xxx]

2 hours ago, friquant said:

Thank you. I followed the video and now she’s sewing great.