Members GraceAVD Posted November 14 Members Report Posted November 14 (edited) Hi everyone, I have a Landis model 25 or Landis 5 in 1 for sale. The machine is fully refurbished and oiled, rolls smoothly and works like a charm. Skiving blade is freshly sharpened. All parts original except for the spring on the back of the machine which is new. The 5 in 1 has the following functions: - Sole cutter - Sole and heel trimmer - Skiver - Edge beveler - Welt roller The machine has been repainted using high quality spray paint, namely the Montana Gold Metal primer, followed by a coat of color (color ref. "Bone") and high gloss varnish from the same brand. All oiling points have been marked with red. I ask 1000 USD for the machine. I'm a bit flexible with the price but not much. I'm located in Sweden and I can ship it anywhere at the expense of the buyer. Here are some specs: weight: 24 kg or 53 lb shipping weight: 27 kg or 60 lb (will be shipped packed in a box and wrapped tightly in 2" or 5 cm thick polystyrene all around) Height: 61 cm or 2 ft (the top parts can be mounted off for shipping tho, in which case the height lands at about 32 cm or a litte above 1 ft) Width: 42 cm or 16,5" Depth: 20 cm or 8" Comment below or DM me if you're interested Cheers, Grace Edited November 23 by Northmount OP reduced price to $1000 US
Members JayEhl Posted November 14 Members Report Posted November 14 Yo, beyond the meticulous paint job I enjoyed the pictures. And the Christmas decoration was an added touch! ~JL
Members GraceAVD Posted November 15 Author Members Report Posted November 15 (edited) 13 hours ago, JayEhl said: Yo, beyond the meticulous paint job I enjoyed the pictures. And the Christmas decoration was an added touch! ~JL Aww, thank you! And yes, sanding and painting is was two whole weeks of full time attendance. You kinda have to wait before you turn the pieces to coat every crevice and corner, and then you have to wait like a day or two to let every layer dry hahaha. Also I was surprised to see that the Montana Gold Metal primer was a darker red colour. Didn't expect that, thought it would be white-ish. Thanks again for the appreciation 😄 Grace Edited November 15 by GraceAVD
Members Zol Posted December 15 Members Report Posted December 15 (edited) oh my, sadly no money for the next several months, plus no trip to Sweden possible before summer. Tack for showing this real fine machine, good luck to find someone, who takes it. Greetings from Hamburg / Germany (that little village far south of Sweden 😁) -> I will post a link in our symaskin teknik forum, as some of us are from / often in Scandinavia -----edit---- done (posted under ebay -> Ebay Dezember 2025 in https://www.naehmaschinentechnik-forum.de Edited December 15 by Zol
Members GraceAVD Posted 4 hours ago Author Members Report Posted 4 hours ago @Zol, Thank you for your interest in the machine and for sharing the link. The machine has already been sold but unfortunately I have got less than zero idea how to move this post to Old/Sold. @Northmount - would you mind to bother with this, like, again..? You seemed to have some magical powers last time. Or does a "SOLD"- kind of comment suffice for any of the moderators to step in and close the topic? Thank you guys for your support and Happy Holidays everyone Cheers, Grace
Northmount Posted 4 hours ago Report Posted 4 hours ago 23 minutes ago, GraceAVD said: Grace Just adding SOLD as the next comment is all you need to do. Then a moderator picks it up and moves to old/sold and locks it so it can't be commented on further.
Recommended Posts