Ambassador leatheroo Posted February 29, 2008 Ambassador Report Posted February 29, 2008 i was checking out the wonderful work on the art-goldberg site and found this bracelet, but it doesnt appear to have a join??? Quote "]http://leatheroo.blogspot
Members Rawhide Posted February 29, 2008 Members Report Posted February 29, 2008 They could have used a lap skive at the joint. That would virtually disappear. Marlon Quote Marlon
Ambassador Luke Hatley Posted February 29, 2008 Ambassador Report Posted February 29, 2008 (edited) i was checking out the wonderful work on the art-goldberg site and found this bracelet, but it doesnt appear to have a join??? Leatherroo, do you think that is the New Process of "Lazer Fusing"? Edited February 29, 2008 by Luke Hatley Quote Luke
Members krains Posted February 29, 2008 Members Report Posted February 29, 2008 i just think its from a really skinny cow Quote I'm what Willis was talkin 'bout! --------------------------------------------------- - Kevin
Drac Posted February 29, 2008 Report Posted February 29, 2008 the ends were skived down and joined. look in the lower right area and you can just make out the line. Quote frissenfrassenmussafrussen...
Moderator Art Posted February 29, 2008 Moderator Report Posted February 29, 2008 Hi Roo, Look at about 5:30 on the piece, the leather edge looks a little thicker and where the seam probably is, it is hidden (both sides, artfully) from the camera. Otherwise it is magic. Art i was checking out the wonderful work on the art-goldberg site and found this bracelet, but it doesnt appear to have a join??? Quote For heaven's sakes pilgrim, make yourself a strop!
Members whinewine Posted February 29, 2008 Members Report Posted February 29, 2008 Hi Roo,Look at about 5:30 on the piece, the leather edge looks a little thicker and where the seam probably is, it is hidden (both sides, artfully) from the camera. Otherwise it is magic.ArtOr at about the 7:40 position. there is a diagonal mark, lighter in color than the rest, possibly a lap joint, as Marlon speculated Quote
Moderator Art Posted February 29, 2008 Moderator Report Posted February 29, 2008 Whatever you say, it is a lap joint either way. 7:40 is out of focus in my pic. Art Or at about the 7:40 position. there is a diagonal mark, lighter in color than the rest, possibly a lap joint, as Marlon speculated...Or at about the 7:40 position. there is a diagonal mark, lighter in color than the rest, possibly a lap joint, as Marlon speculated... Quote For heaven's sakes pilgrim, make yourself a strop!
Contributing Member TwinOaks Posted March 1, 2008 Contributing Member Report Posted March 1, 2008 I'd speculate on a lapped join cut at a diagonal so there's no 'line' across the leather. Quote Mike DeLoach Esse Quam Videri (Be rather than Seem) "Don't learn the tricks of the trade.....Learn the trade." "Teach what you know......Learn what you don't." LEATHER ARTISAN'S DIGITAL GUILD on Facebook.
JohnD Posted March 1, 2008 Report Posted March 1, 2008 (edited) I think I see something at the red arrow that looks like a possible joint. Actually after reading the other posts and looking a t the pics again I can see the diagonal line too Edited March 1, 2008 by JohnD Quote (rdb):God looked down at the world, and said "See, right there in Witchita, next to the railroad tracks, I didn't put enough dandelions".
Moderator Johanna Posted March 1, 2008 Moderator Report Posted March 1, 2008 Did anyone PM Vera yet? Now I'm curious!! Johanna Quote You cannot depend on your eyes when your imagination is out of focus. - Mark Twain
Members Spider Posted March 2, 2008 Members Report Posted March 2, 2008 Naw, I think it's from the ankle of the poor cow...cut like a sleeve.... Then peeled off..... Worked while wrapped around a beer bottle....Yeah, that's it... Quote From the insane mind of SPIDER... http://spiderflesh.com Myspace: Spiderflesh Facebook: Spiderflesh George
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.