Members K-Man Posted February 13, 2009 Members Report Posted February 13, 2009 Most of these designs are merely marketing ploys, as the reinforcement actually provides little additional strength to the holster mouth, especially on the IWB holsters. I disagree. The reinforcement is designed to hold the mouth of the holster open once the gun is drawn. It then allows for one-handed reholstering. In some environments/situations, that can be a critical factor. Some of the designs that are made this way do add a great deal more bulk. But for those holster makers who are skilled in that respect, the addition of the reinforcement piece does not add much more in overall thickness. JRB: You're going to have a very hard time handsewing that type of throat reinforcement. Try adding an extra piece on the front side of the holster only. Quote
Members JRB Posted February 13, 2009 Author Members Report Posted February 13, 2009 I disagree. The reinforcement is designed to hold the mouth of the holster open once the gun is drawn. It then allows for one-handed reholstering. In some environments/situations, that can be a critical factor. Some of the designs that are made this way do add a great deal more bulk. But for those holster makers who are skilled in that respect, the addition of the reinforcement piece does not add much more in overall thickness. JRB: You're going to have a very hard time handsewing that type of throat reinforcement. Try adding an extra piece on the front side of the holster only. Thanks K-Man! Wasn't sure if adding it to the front would offer much advantage or not. Also, I guess when the exotics are used they are sewn over this piece? Quote ΜΟΛΩΝ ΛΑΒΕ
Members K-Man Posted February 13, 2009 Members Report Posted February 13, 2009 Thanks K-Man! Wasn't sure if adding it to the front would offer much advantage or not.Also, I guess when the exotics are used they are sewn over this piece? Yes, that's what normally is done. But at the same time, if adding exotics, use some artistic flair and think outside the box. Quote
Drac Posted February 13, 2009 Report Posted February 13, 2009 when I did one of these, I stitched the pancake pieces together on the side the throat piece was wrapping around, then flattened it back out and stitched the band on. plus I used a piece of metal strap banding (like you see pallets of goods strapped down with) between the body and throat piece. worked quite well. Quote frissenfrassenmussafrussen...
Members BOOMSTICKHolsters Posted February 13, 2009 Members Report Posted February 13, 2009 I most definitely agree with K-man on this - there are folks in certain lines of work who find one handed re-holstering very necessary. Also, keep in mind that a thin piece of leather would hold a steel reinforcement just as sufficiently as thick leather, without adding too much bulk. Finally, I would also suggest that anyone interested in building this kind of holster should respect the original designer (who is a member here), and only build this holster for personal use. Quote
Members Dwight Posted February 13, 2009 Members Report Posted February 13, 2009 Any tips on how holter makers are stitching the reinforcements that wrap around from front to back on a pancake style holster?Here are some examples. I don't want to rain on your parade or anything, . . . but that particular design looks very much like a Sparks VMII, . . . and I believe the design is patented/copyrighted. That said, . . . the front "wing" is sewn first, . . . then the two pieces are laid down with the wing standing up like an airplane tail fin, . . . and the third piece sewn onto the front and back by starting in the back, . . . rolling across the seam, . . . sewing the front, . . . coming back again on the seam, . . . and finishing up in the back. I know this because just for kicks and giggles, . . . I made one for myself. They earn their money on that particular style, . . . and will never have any competition from me. And, yes, if you do carry a concealed handgun, . . . you will find that the holsters that do not have the re-inforcement tend to close up, . . . and that can be a sticky situation as you try to put away a sidearm, . . . and there ain't no place to put it. My main two designs I make have the reinforcement even if it is for a mouse gun. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Members JRB Posted February 13, 2009 Author Members Report Posted February 13, 2009 I most definitely agree with K-man on this - there are folks in certain lines of work who find one handed re-holstering very necessary. Also, keep in mind that a thin piece of leather would hold a steel reinforcement just as sufficiently as thick leather, without adding too much bulk.Finally, I would also suggest that anyone interested in building this kind of holster should respect the original designer (who is a member here), and only build this holster for personal use. I honestly don't even remember where I copied the pics from, but I know several makers that use this same similar design (one of them has already been mentioned but there are others). Either way, I don't think it's going to be an issue for me because I think w/hand stitching I'll go w/K-Man's suggestion. Quote ΜΟΛΩΝ ΛΑΒΕ
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.