jbird Report post Posted February 25, 2009 Now I know that there are some knife makers here and if you could answer some questions I would be gratefull to you, so first of i am taking a class to get a degree on knife making anyway, before this starts I want to make a few but were do get steel at this is my top question were at, and more questions are coming. Josh Quote Share this post Link to post Share on other sites
DCKNIVES Report post Posted February 25, 2009 Glad to hear it Josh.I 'll be glad to help when I can, but for starters ,here's a list of places to get your needs.Dave Not my site but will work. Visit My Website Quote Share this post Link to post Share on other sites
RandyScott Report post Posted February 25, 2009 Josh, Dave has provided an excellent listing of suppliers and vendors to the knifemaking craft! Since you indicated there may be more questions in the future on knifemaking, perhaps it would be better to post those questions on one or more boards/forums catering to the knifemaking community, such as: www.knifenetwork.com/forum/index.php http://forums.dfoggknives.com/index.php?ht...foggknives.com/ http://www.bladeforums.com/forums/forumdisplay.php?f=789 They all require registration to post and it is free. and finally, the following link contains a lot of links to great information! http://gbrannon.bizhat.com/ Quote Share this post Link to post Share on other sites
jbird Report post Posted February 25, 2009 Dave and Randy Thanks very much for the help I am once again headed down the path of a new trade and skill, Dave I will be hitting you up for help as I go yes in deed. Josh Quote Share this post Link to post Share on other sites
moon Report post Posted February 25, 2009 Another good forum is www.britishblades.com Quote Share this post Link to post Share on other sites
ChuckBurrows Report post Posted February 25, 2009 Josh - a couple of questions... 1) type and style of knives you're interested in 2) forging or stock reduction or both 3) Where at in Utah? With those answers we can pinpoint your needs/desires better and direct you to resoruces fitting those needs/desire - also IIRC there are a couple of makers in Utah and western Colorado...... Quote Share this post Link to post Share on other sites
jbird Report post Posted February 25, 2009 (edited) Howdy Chuck I am interested in making round knives and hunting knives as well as other leather knives trim knives and such. Stock to begin with but forging once I get in to it. 20 miles south west of salt lake city, herriman. Thanks so much you are all great to help. PS some wood working chisels at some point to. Josh Josh - a couple of questions...1) type and style of knives you're interested in 2) forging or stock reduction or both 3) Where at in Utah? With those answers we can pinpoint your needs/desires better and direct you to resoruces fitting those needs/desire - also IIRC there are a couple of makers in Utah and western Colorado...... Edited February 25, 2009 by jbird Quote Share this post Link to post Share on other sites
Pelallito Report post Posted February 7, 2010 Jbrd, Here is another website-http://www.knifenetwork.com/forum/index.php. Like the others, you have to register to post. Good luck. Fred Quote Share this post Link to post Share on other sites
TexasJack Report post Posted February 7, 2010 (edited) The late Bob Engnath set up a pretty good web site with lots of info and it has been maintained intact: Bob Engnath. A couple of others have mentioned the knifenetwork site, and I highly recommend it as well. Good folks - in fact several of them hang out here as well. Edited February 7, 2010 by TexasJack Quote Share this post Link to post Share on other sites
jbird Report post Posted February 8, 2010 Thanks Guys I will look in to it, thanks for bringing this thread to life JOSH Quote Share this post Link to post Share on other sites
