Members Tkleather1 Posted July 31, 2009 Members Report Posted July 31, 2009 I jsut want to thank Brenda at Lasergiftcreations.com for making me a new Makers mark. I am very happy with not only the stamp but also dealing with all of my stupid questions. Brenda did a great job with the stamp and had incredible customer service. Thank you Brenda. I will post a picture of the impression later today when I get back home. Tim TK-Leather Quote
Members Deb59 Posted August 1, 2009 Members Report Posted August 1, 2009 I second that - I just got mine in the mail today from Brenda. I ordered it on Monday - Talk about quick service!!! I will get a picture posted as well. Thanks Brenda!!! Quote
Members santarick Posted September 5, 2009 Members Report Posted September 5, 2009 Looking foreward too seeing pictures of them I need too have one made myself. santarick Quote
Members oldtimer Posted September 9, 2009 Members Report Posted September 9, 2009 I got my new maker mark this week also. I had one made by The Green Parrot, made of some kind of nylon material a couple of years ago, but I accidently dropped it on my stone and the edge around my name broke and the stamp was of no use anymore, so I ordered a new one made of engraved, solid brass. I´ll make a new handle from stainless steel. The big advantage is the square shape which makes it easy to adjust to the proper position. / Knut Quote
Members Tkleather1 Posted September 9, 2009 Author Members Report Posted September 9, 2009 I got my new maker mark this week also. I had one made by The Green Parrot, made of some kind of nylon material a couple of years ago, but I accidently dropped it on my stone and the edge around my name broke and the stamp was of no use anymore, so I ordered a new one made of engraved, solid brass. I´ll make a new handle from stainless steel. The big advantage is the square shape which makes it easy to adjust to the proper position. / Knut Who did you get that one from? Quote
Members oldtimer Posted September 10, 2009 Members Report Posted September 10, 2009 Who did you get that one from? Bought here in Sweden from http://www.stampelfabriken.se/index.html?katid=sub20060530202908321∏=Brännstämplar. It is supposed to give heat imprints along with a handle similar to a soldering iron / Knut Quote
Members Cowboy316 Posted September 10, 2009 Members Report Posted September 10, 2009 heey tthere Tk im lookin for a reasonble priced makers mark and my curiousity got me and was wondering what that ran ya and in i couldsell lt or to to get one made in getting busy enought that im thinkin i need one now LOL Cowboy316 Quote
Members joefarmer Posted October 16, 2009 Members Report Posted October 16, 2009 Cowboy316 I purchased one from lasergiftcreations several weeks ago. It cost$35 +$5 for shipping. Joefarmer Quote
BWL Posted October 16, 2009 Report Posted October 16, 2009 I got my new maker mark this week also. I had one made by The Green Parrot, made of some kind of nylon material a couple of years ago, but I accidently dropped it on my stone and the edge around my name broke and the stamp was of no use anymore, so I ordered a new one made of engraved, solid brass. I´ll make a new handle from stainless steel. The big advantage is the square shape which makes it easy to adjust to the proper position. / Knut That's the best makers mark if seen by far. Hands down. Quote
Members Tkleather1 Posted October 16, 2009 Author Members Report Posted October 16, 2009 Sorry Tim I missed this. Mine is from Brenda at LasergiftCreations . com It was 35 or 40 I dont remember how much now I am gonna have her make me another one soon that is a little different than most. Tim Worley TK-Leather Quote
Members Bar C Leather Posted October 19, 2009 Members Report Posted October 19, 2009 I got two nylon ones and they will work for now, I just don't like how much bounce they have. Just remember NOT to use your maul or mallet for imprinting...you need to use a metal hammer to reduce the bounce!! I can't wait to have a nice metal one made that can be used with a heating element also! Infiniti Stamps is who I plan to use but not 100% sure yet. Quote
Members Tkleather1 Posted October 19, 2009 Author Members Report Posted October 19, 2009 I got two nylon ones and they will work for now, I just don't like how much bounce they have. Just remember NOT to use your maul or mallet for imprinting...you need to use a metal hammer to reduce the bounce!! I can't wait to have a nice metal one made that can be used with a heating element also! Infiniti Stamps is who I plan to use but not 100% sure yet. I use my maul and dont have any problem. Quote
Members dragoncut Posted October 20, 2009 Members Report Posted October 20, 2009 I have started making some makers stamp and found that using a dead blow hammer works great. You get zero bounce even with the Delrin stamps. Quote
Moderator Art Posted October 20, 2009 Moderator Report Posted October 20, 2009 I use a Barry King 96oz maul on a Infinity Stamp with the work on a surface plate that sits on a circa '40s or '50s GI metal desk sitting on a concrete floor. Deep impression and no bounce no how. Art I got two nylon ones and they will work for now, I just don't like how much bounce they have. Just remember NOT to use your maul or mallet for imprinting...you need to use a metal hammer to reduce the bounce!! I can't wait to have a nice metal one made that can be used with a heating element also! Infiniti Stamps is who I plan to use but not 100% sure yet. Quote
Members forteleather Posted November 1, 2014 Members Report Posted November 1, 2014 What's the Web address for the green parrot? Can't seen to find it. Tx Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.