Jock54 Report post Posted May 19, 2011 Glad this helped. Carr52, For length of lacing I use the finished length I want times 1.5. This usually gives plenty of leftover for terminal turks heads leaving tassels hanging, etc. For simple braids I usually wind up cutting off several inches, but I'd rather have too much than not enough. I'd be interested to see how others figure this too. Timothy Quote Share this post Link to post Share on other sites
Jock54 Report post Posted May 19, 2011 Hi Timothy, this is Jock54, from Warwick, Queensland, Australia. I have been plaiting kangaroo leather lace for the last four years. I make lots of leather plaited belts, hat bands, with turks-head knots, this allows you to adjust the band to the size of the hat, usually a cattlemans hat in Australia. I also plait dog and cat collars, and dog leads. The hat bands, I plait them flat or round. When I make a belt for a customer, to find how much leather lace is needed so that it is not short, I need to get their waist size, for example, I am 40inches, add another 6 to 10 inches, that makes 46inches, then multiply 46x3=138inches. That means each strand of lace will be 138inches long, or 11feet 6inches. I use this formula for plaiting all my belts, and it works every time. When I have time, I will put some photoes up of my leather belts and things. I f there is anything else I could help you with, just contact me, I am a member of leatherworker.net. Quote Share this post Link to post Share on other sites
sherlockian100 Report post Posted November 27, 2012 I am wondering if anyone know of any end pieces that could perhaps be purchased at Tandy, that could attach to the ends to make this a beacelet? Any help would be appreciated. Quote Share this post Link to post Share on other sites
WinterBear Report post Posted November 27, 2012 You might try looking for a jewelry finding used for fabric chokers and bracelets sherlockian. It is commonly called a "ribbon crimp end". They are sold by most places that sell beads and stringing supplies, as well as online (I use Fire Mountain Gems for much of my beading supplies), and materials range from plated metal to platinum, with corresponding prices. Anyway, once you've attached a ribbon crimp end to each of the ends of your braid, a regular bracelet clasp (lobsterclaw, toggle, magnetic clasp, etc.) can be attached to the crimp end for the actual clasp. Quote Share this post Link to post Share on other sites
sherlockian100 Report post Posted November 27, 2012 Thanks, I'll look into it. Quote Share this post Link to post Share on other sites
Davidstryingtosew Report post Posted January 23, 2016 Wow. That is nice. Downloaded it too. Thanks for sharing David Quote Share this post Link to post Share on other sites
10Thumbs Report post Posted April 28, 2019 I note several folks looking for something to make with this braid. I have made several hatbands with both the 9 and the 7 string version of this braid. If you make a braid with 3/32" lace, to about 30" long (strings to be ~1.5X finished, length) you can put a little ring knot near each end and let the end be a fringe. Then just put a nice little tack pin like a Texas Lone Star to hold it together where it crosses itself and you're done. Several years ago, I was selling these faster than I could make them! Try using 2 different colors of string, and if you move the colors to different spots, you will get a different pattern too. Mike Quote Share this post Link to post Share on other sites
hotleatherworlds Report post Posted March 13, 2023 This is a nice tutorial of braiding and i will try it next after completing my current leather work. Thank you for posting. Quote Share this post Link to post Share on other sites
