Bobbin Winder For Singer 97-10

[DavidMillsSaddlery]

Hello!

I have a 97-10 I just drug out of storage, and I'm looking for a a bobbin winder I can set up for it! I won't be using the wax thread, so the pot ain't needed!

If someone does have the heater set up I might be interested if the price is right... (cheap)

Is there any kind of manual bobbin winder a guy can use?

Thanks

David

[catskin]

I have never seen a 97-10 or the bobbin but the BUSM / Pierson have a manual / hand crank one, could you possibly rig one up that would work sort of the same. Maybe pulleys insead of gears.

[DavidMillsSaddlery]

I have never seen a 97-10 or the bobbin but the BUSM / Pierson have a manual / hand crank one, could you possibly rig one up that would work sort of the same. Maybe pulleys insead of gears.

[DavidMillsSaddlery]

I replied from my blackberry, and I guess this forum isn't set up for a blackberry... I was going to post a picture from my phone...

http://www.facebook.com/media/set/?set=a.257246370973038.69861.100000630308869&type=3#!/photo.php?fbid=289825154381826&set=a.257246370973038.69861.100000630308869&type=3&theater

try that

[CowboyBob]

We have one that will work that you can mount on a board & use a small motor & foot pedal off a household machine.

Bob

[DavidMillsSaddlery]

I will give you a call next week sometime!

David Mills

We have one that will work that you can mount on a board & use a small motor & foot pedal off a household machine.

Bob

[Springerpanhead]

If you have a lathe or a friend with one it's real easy to make an adapter to go on the shaft of one of those little hand cranked grinding wheels that clamp on a bench. They make a real fine bobbin winder. Cheap too!