Just Bought A Juki Lu 562, Now I Need A Servo!

[Haley]

Hi guys,

New to the leatherworker forum and was hoping to get some advice.

I'm interested in shoemaking which is the reason I purchased this machine,

The Juki LU 562 is the first leather sewing machine I've had,

Wondering if there are any decent Servo motors I can get for around $100.

This baby is rigged with a clutch motor and ready to rip through some upholstery work.

Any other comments and advice would be helpful.

Thanks!

[Sylvia]

Go to Ferdco.com and look at their closeouts. (They just shut down their business.. and are slowly clearing house) I think they have one that might work... You'll need to Email them and get a local number for them. Cheryl is the woman's name.

(real nice gal.) but be warned... she lives 1 hour away from the old plant. Anyway... here is the advertized deal on their closeout servers

Internet Specials - New DC Servo Motors 110V with adjustable speed settings - While they last - $89.00 plus Freight.

[ItsthatFLO]

I'm looking for a servo as well but I can't find my machine on there.

Its a Chandler 26-188. It has a big clutch motor on it but it is much too fast for me.

Any ideas?

[Ferg]

Call Bob Kovar at Toledo Industrial Machines. 866-362-7397

ferg

I'm looking for a servo as well but I can't find my machine on there.

Its a Chandler 26-188. It has a big clutch motor on it but it is much too fast for me.

Any ideas?

[Sylvia]

Someone can correct me if I am wrong but I believe that any comparable horse power servo motor will work on your machine.

[Ken Nelson]

Someone can correct me if I am wrong but I believe that any comparable horse power servo motor will work on your machine.

You are right, they will bolt up in the same holes, however you may need to purchase a different belt if the pulley is of a different size. HTH Ken

[Techsew Ron]

Someone can correct me if I am wrong but I believe that any comparable horse power servo motor will work on your machine.

correct. any servo motor will fit as long as it has the 3-bolt hole pattern (most motors do).