Members Sunnyside Scott Posted June 15, 2013 Members Report Posted June 15, 2013 Hey guys, I wanted to take a few minutes to introduce myself, I have been sewing for almost two years building gear out of Cordura and nylon webbing. Since I live about three hours away from any industrial sewing machine mechanic I have to search the web for information, and more than a few times I have landed here so I thought I should become a member. From the posts I have read this looks like a really nice group of people. The other forums I frequent are Snipers hide and DIY tactical. Scott Quote
Members hornm Posted June 15, 2013 Members Report Posted June 15, 2013 Welcome aboard! If you ever make it to the Portland/Vancouver give a holler. There's at least a couple of us down here. Michael Quote Michael "If the women don't find you handsome, they should at least find you handy" Red Green
Members gottaknow Posted June 16, 2013 Members Report Posted June 16, 2013 Welcome. I'm over in Spokane. Quote
Members Cyberthrasher Posted June 16, 2013 Members Report Posted June 16, 2013 Welcome. I'm over in Spokane. I'm just south of you. So, Scott, which end of the state are you in? Quote hellhoundkustoms.wordpress.com www.facebook.com/hellhoundkustoms www.etsy.com/shop/HellhoundKustoms
Members DJole Posted June 16, 2013 Members Report Posted June 16, 2013 Hey guys, I wanted to take a few minutes to introduce myself, I have been sewing for almost two years building gear out of Cordura and nylon webbing. Since I live about three hours away from any industrial sewing machine mechanic I have to search the web for information, and more than a few times I have landed here so I thought I should become a member. From the posts I have read this looks like a really nice group of people. The other forums I frequent are Snipers hide and DIY tactical. Scott You must not be over on the Rainy side--I'm in Tacoma. Quote \D. Jole \ --> <http://djole.altervista.org/djole/Publications/Leather/Lindex.htm>
Members Sunnyside Scott Posted June 16, 2013 Author Members Report Posted June 16, 2013 Looks like lots of active members here in Washington, I'm located in Sunnyside, the south central part of the state, which is about 200 miles from Spokane, Seattle and Portland. I keep my eye on Craigslist for all three cities and am always looking for a good deal on a machine. I do need to start getting rid of some to make room for newer ones, most are just standard walking foot machines, a bartacker, a cylinder arm, and a 20" long arm. I don't have any heavy leather workhorse machines because up to this point I only do tarp work and build tactical gear. Scott Quote
stelmackr Posted June 16, 2013 Report Posted June 16, 2013 Greetings from Richland, WA. Quote Bob Stelmack Desert Leathercraft LLC Former Editor of the, RawHide Gazette, for the Puget Sound Leather Artisans Co-Op, 25 years of doing it was enough...
Members camano ridge Posted June 16, 2013 Members Report Posted June 16, 2013 Welcome from the wet side, Stanwood WA. Quote https://www.facebook.com/CamanoRidgeCustomLeather?fref=ts
Members shtoink Posted June 16, 2013 Members Report Posted June 16, 2013 Greetings! Yup, the wet side of the state is right... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.