What To Use To Sand Belt Loops

[rccolt45]

Hi guys I am wondering what you all use to sand your belt loops on own holsters. I have tried the small Dremel tool sanding drums but find they are to large. For the flat parts I use a nail file or emery board but what to use on the top and bottom round parts?

[Geneva]

I have never sanded a belt loop. You should make sure your edging tool is sharp though

[Colt Hammerless]

I use a wood dowel (likely 1/4 inch diameter) with sandpaper wrapped around it. I tape the sandpaper at the top and the bottom. I then stick it in the drill press. Works pretty fast.

Paul

[Red Cent]

I use this.

http://www.sears.com/dremel-114-952-3-8-inch-aluminum-oxide/p-SPM2156142101?prdNo=7&blockNo=57&blockType=G57

[chiefjason]

Any sanding is minor and done by hand. I burnish them well though. FWIW, they will get wrecked pretty quick and the belt will do some burnishing on them with wear. I get them decent and functional and focus on the outside edges for looks.