Jigs, Whatchmacallits, Thingamabobs Etc.

[Pounder]

Morning All:

I have been searching for days for a thread that had a self centering hole punch alignment tool but to no avail. During this search I got to thinking there are probably thousands of little hand made jigs, helpers or whatever you want to call them out there that can assist the business leathercrafter. I know there are probably past threads that cover this subject but I cannot find them and (I hope) it never hurts to resurrect a good subject again.

So, how about sharing some of those little trick machines that help in the shop and cut down on time. For example, jigs to help with letter placement, hole centering for belts, different stitching ponies, just to name a few.

A big thank you in advance to all who participate.

[J Hayes]

Weaver sells this one to work with thier own tools, looks nice to me, anybody have one?

For centering one may be able to use a self centering dowling jig used in woodworking. Ive been meaning to try mine but they will need modification. I have 2, one US made one which is really nice and accurate, Pro Center brand, and one from Harbour Freight which is not so accurate.

I have a table top drill press that will eventually get a woodworking type fence and use that for repetitive tasks.

YMMV

Jeremy

[Tree Reaper]

For round objects I'll lay out a square pattern behind the leather, it helps to have reference lines when stamping or carving.

[robertmeco]

Weaver sells this one to work with thier own tools, looks nice to me, anybody have one?

For centering one may be able to use a self centering dowling jig used in woodworking. Ive been meaning to try mine but they will need modification. I have 2, one US made one which is really nice and accurate, Pro Center brand, and one from Harbour Freight which is not so accurate.

I have a table top drill press that will eventually get a woodworking type fence and use that for repetitive tasks.

YMMV

Jeremy

Weaver sells this one to work with thier own tools, looks nice to me, anybody have one?

For centering one may be able to use a self centering dowling jig used in woodworking. Ive been meaning to try mine but they will need modification. I have 2, one US made one which is really nice and accurate, Pro Center brand, and one from Harbour Freight which is not so accurate.

I have a table top drill press that will eventually get a woodworking type fence and use that for repetitive tasks.

YMMV

Jeremy

I have one and love it it really works great

[camano ridge]

Check out Blackriverlaser.com they are also on ebay (prices there are discounted). THey have a hole center template it is designed for different widths of belts and straps. Lay it on the belt or strap line up the edge width marks you can choose from different hole spacing 1/2" 1' etc. poke a scratch awl through the aproprate holes to mark. Remove the template and you have correctly spaced and aligned hole marks aling your punch over the mark and punch away. IT is actualy pretty quick to do. They have many template availble for doing all kinds of thing inclusing a handy pocket leather thickness gauge.

[TomG]

Some time back, this centering discussion came up and someone posted a photo of a simple jig that was self-centering on a strap. I just spent and hour or so looking for the thread and looking for the JPG on my PC, but can't find it on either.

It was basically a square of thick Plexi, a line drawn down the center with a hole drilled in the middle to allow the punch to fit in, and 2 pins along that line on either side. You put I over the strap and rotate it so the pins touch the leather on either side and that centers the punch hole.

If someone else remembers it, maybe they can post the link or picture.

[camano ridge]

Tom, this might be the thread you are refering to check out post #12 there are several other posts as well with different ideas. The one inpost 12 is an acrylic self centering dowel jig. http://leatherworker.net/forum/index.php?showtopic=38348&hl=+belt%20+hole%20+centering#entry237928

[TomG]

That was it. Thanks for finding it.

[Dwight]

I don't mind sharing, . . . cause I'm basically a cheap old coot, . . . if I can make it, . . . I do it.

Here's some of my "creations". All pretty much out of EMT (electrical conduit).

Back Row, Left to right: 1 1/4 strap end rounder, 1 inch strap end rounder, specialty punch for making a strap end to hold the hammer down on a single action.

Middle row: 3/4 inch strap end punch, special belt ending punch, corner rounder, 3/4 inch strap end punch, 3/4 inch round punch, 1 1/4 bag punch

Front row: 1/2 inch round punch, 3/4 bag punch, 5/8 bag punch, couple of old dull bag punches, . . . dremel tools made from dowels with drill bits used as metal shaft.

I probably have a total $$ investment of $5 in all you see there.

May God bless,

Dwight

Edited December 14, 2013 by Dwight

[Pounder]

Once again the generosity of this site and its members is outstanding.

Camano Ridge, that was the same post I was searching for, thanks for sharing it again.

Dwight, great use of conduit, I will definitely have to try my hand at that although I will probably not get them as nice as yours.

Tom G, great simplification of the jig, based on this and some pics I am sure I can make one and save some money.

Everyone keep the ideas coming I am sure there are several people who enjoy reading your posts and get an idea or two . And a big thank you to all that have responded.