Members kidbeey Posted June 6, 2014 Members Report Posted June 6, 2014 I pulled the head off the above machine. I am now putting it back together again. The problem I have is knowing how the cam runner (my description) that is attached to the slide bar and sits in the feed motion cam wheel. Now this cam runner is round with a flat spot on it. I assume the rounded part goes to the outside of the cam wheel and the flat spot sit on the inner part of the cam wheel. Can someone please confirm my thoughts. Quote
CowboyBob Posted June 6, 2014 Report Posted June 6, 2014 To be honest with you I don't fully understand what you are referring to.Do to the way this machine is built it is pretty hard to put it together wrong.. Some pics or parts # would help me understand better. Quote
Members Constabulary Posted June 6, 2014 Members Report Posted June 6, 2014 Some pictures may help. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.