Members paris3200 Posted October 20, 2008 Members Report Posted October 20, 2008 I finished up this one last week. I've just got a few small tweaks to do and I'll be pretty satisfied with this design. Let me know what you think. As you can probably guess its my take on the old Askins Avenger. Sorry for the sub par pictures. It was raining outside. Quote
Members WaG35 Posted October 20, 2008 Members Report Posted October 20, 2008 Very clean looking holster. Are you going to leave it natural? Quote
Members paris3200 Posted October 21, 2008 Author Members Report Posted October 21, 2008 Yes this one I'm going to leave natural. It was just intended to be a prototype to hammer out some design issues. I've also got to determine what dye to use. I had some Angleus that I had to cut dramatically to get the color I wanted, but the cutting caused the leather to dry out. Quote
Members BOOMSTICKHolsters Posted October 21, 2008 Members Report Posted October 21, 2008 'Looks like you're off to a good start. If you tape a 5/16" dowel rod on top of your pistol you can mold a nice sight channel that will smooth out the draw, make the holster stronger and keep the front sight clean. I bought a 1 1/2" bar of cold rolled steel to use as a block to shape the belt channel in my front belt loop; you might give that a try to make the holster easier to thread a belt though. Keep posting pictures of your work. Quote
Members gunfighter48 Posted October 21, 2008 Members Report Posted October 21, 2008 You might also want to fun a stitch line (or even a double line of stitches) around the belt slot cut out. It will help to keep it from coming apart with use. Quote
Members paris3200 Posted October 21, 2008 Author Members Report Posted October 21, 2008 Jeff, The dowel rod for the sight channel makes sense. I will give it a try. I am a little confused about the use of the steel bar. Do you place it through the loops in the molding process to get the holster in the correct shape for the belt? Gun Fighter, You've got a real valid point about stitching around the belt slot. I believe I will have to extend the holster a little in that area to have enough room for the stitching. I will give that a try though. Thanks everyone, Jason Quote
Members BOOMSTICKHolsters Posted October 22, 2008 Members Report Posted October 22, 2008 If you have the resources to bend the bar on a curve, you can do that but it complicates things a little. If that is the way you want to do things, I suggest you do the belt shaping after you have boned the holster around the pistol. A straight bar will work fine, as you really only need to shape the loop, and not the slot. Quote
Members Shorts Posted October 22, 2008 Members Report Posted October 22, 2008 Good work on this holster. I tried a prototype myself and it is a challenging model to build. They work really well, but challenging. Quote
Members mattsh Posted October 22, 2008 Members Report Posted October 22, 2008 Looks good. Did you use edge kote or is that just dye on the edges? Quote
Randyc Posted October 22, 2008 Report Posted October 22, 2008 You designed and built a nice clean holster. To form my belt tunnels I stitched 2 8oz straps together. I form my tunnel around the straps. Randy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.