Minimalist Wallet

[Hi Im Joe]

Hello Everyone,

Here is a minimalist wallet I made out of Horween Autumn Latigo. I decided to go back to the traditional European way of stitching with a pricking iron and an awl. I find it to be much more enjoyable. However, I suck at it so this wallet and a couple other simple wallets served as practice for me. This is stitched at 8 sti with .6mm tiger thread.

The wallet has two slits for cards as well as an internal divider that makes two more pockets for cards. I really like this design because I put the cards I use a lot (e.g. drivers license, credit cards etc..) in the slits and the rest of my cards in the divider pockets.

Tell me what you like and how I can improve! As always thank you for taking the time to stop by, view, and comment!

Joe

[MonicaJacobson]

Looks pretty good to me!

Also, I like the pocket on the inside. I don't think I've seen that before. Quite cool.

[Hi Im Joe]

Thanks Monica! I stole the idea from Teranishi. His stuff is awesome. I'm still not sold on the tiger thread. I got some Barbours 18/3 I'm going to use next. I think I may just break down and buy Lin cable. But it hurts to spend 50 bucks on a spool.

[bwillielv]

I wish my stitching looked that bad!

[Hi Im Joe]

I wish my stitching looked that bad!

Thank you very much! I guess I am hard on myself but it's important to me to try to continuously improve.

[thefanninator]

Nice work.

Stitching looks pretty good. I'd say go smaller on the thread but your .6 tiger thread must just look bigger...maybe the giant photo!

I've been using Lin Cable 432, which is .63mm, so almost the same.

Yeah, give Lin Cable a try. I think you'll like it.

[DavidL]

Wallet looks great. I like the inner compartment, looks like it can fit at least 10 cards.

One thing I noticed with a lot of sellers on etsy are that they stitch in 4-5 Stitches per inch. The larger the stitch the more emphasis there is on it, making it look less machine stitched, but still not too noticeable or off putting at the same time. When the wallet is stitched 7SPI and .6mm it gives the wallet a less for lack of a better word "crowded" feel because the thread is thicker than machine stitching and is a lot of stitches considering some wallets are made .4mm thread or smaller and 7 SPI. A good pairing would be .6mm and 5 SPI, giving it a rugged look.

I own fil au chinois thread and to be honest its not worth the money unless you are doing 150 dollar watch bands or sell bags for 500 plus. A machine thread like gutterman, serafil or another brand in the correct thickness would work just as well. The thread wouldn't have any impact to any buyers at that price. High quality rivets would make a stronger impact.

[Airth]

That's pretty slick!

[Hi Im Joe]

Nice work.

Stitching looks pretty good. I'd say go smaller on the thread but your .6 tiger thread must just look bigger...maybe the giant photo!

I've been using Lin Cable 432, which is .63mm, so almost the same.

Yeah, give Lin Cable a try. I think you'll like it.

Than you very much!

I think because the tiger thread is a flat braided thread it just looks bigger than it really is. That is one of my biggest issues with Tiger Thread. I'm just not sold on how it looks because it lays so flat.

Wallet looks great. I like the inner compartment, looks like it can fit at least 10 cards.

One thing I noticed with a lot of sellers on etsy are that they stitch in 4-5 Stitches per inch. The larger the stitch the more emphasis there is on it, making it look less machine stitched, but still not too noticeable or off putting at the same time. When the wallet is stitched 7SPI and .6mm it gives the wallet a less for lack of a better word "crowded" feel because the thread is thicker than machine stitching and is a lot of stitches considering some wallets are made .4mm thread or smaller and 7 SPI. A good pairing would be .6mm and 5 SPI, giving it a rugged look.

I own fil au chinois thread and to be honest its not worth the money unless you are doing 150 dollar watch bands or sell bags for 500 plus. A machine thread like gutterman, serafil or another brand in the correct thickness would work just as well. The thread wouldn't have any impact to any buyers at that price. High quality rivets would make a stronger impact.

Thanks David! A lot of my wallets prior were stitched at 5 or 6 sti but in order to not have gaping holes you have to use thicker thread. I don't think 5 sti and .6mm thread would look very good personally. I was using 1mm thread at 5 sti and it fit nicely but it made for a very chunky feeling stitch.

I have some 18/3 Barbours linen thread. I'm going to try that out. It is much cheaper (probably by about half) than the Lin Cable.

That's pretty slick!

Thanks Airth!

[Basically Bob]

Looks good to me, Joe and your stitching is just fine. Keep at it.

Here's a quick pic of a credit card wallet that I made and have used daily for about a year. Stitched at 7spi, Dixon pricking iron, 5/18 barbour linen thread. Just thought you would like to see how the thread/spacing works.

My apologies for the upside-down photo.