Which Side Is Which On A Snake Skin?

[Colt W Knight]

Just to clarify, Yes, you do remove the clear scales off the skin. A spoon does the trick nicely. If you leave them on, they will flake off over time and look pretty gnarly and get everywhere. I have never heard of anyone leaving those on.

[KalL]

I flaked mine off but it doesn't look as nice as yours.I'm still experimenting with them. I tried an eraser, air compressor, brush, and a rag. It seems they don't loosen up unless they are damp for some reason. I must be doing something wrong...

Edited November 23, 2014 by KalL

[NVLeatherWorx]

I have been doing this trade for over 40 years and have never been taught nor even heard of removing the scales from a snakeskin. The scales are what gives you the true vibrancy of the pattern and gives the finished the product the authenticity that a consumer wants when spending the money that you do for a real snakeskin item. Furthermore, a professionally tanned snakeskin has never lost any of the scales, at the least the ones that I use haven't. The biggest problem here is those home tanners who do snakeskin's that they have harvested locally and use the home method which is just short of embalming which dries out the skin and causes the scales to flake off. If you are going to make something with snakeskin then bite the bullet and pay for a professionally tanned skin, otherwise you will end up with a sad looking piece of snakeskin that has no real character.

[Troy Burch]

Furthermore, a professionally tanned snakeskin has never lost any of the scales, at the least the ones that I use haven't.

NV Leather Worx, where do you buy rattlesnake skins? I buy at tandy and they flake like crazy.

[NVLeatherWorx]

If you are purchasing rattlesnake skins from Tandy then you are buying a product that is not part of their company inventory. Tandy Leather only sells Python skins and I have never had an issue with the scales coming off. One little trick that I picked up years ago was to seal the finish (in this case the scales) by applying a top coat sealant; I use the Clear-Lac from LCI and I make sure that it gets under the scales so it acts like a glue.

However, I have found that it is a common practice to use snakeskin as if it were a main material, it is intended to be used as an inlay material only.

I purchase my snakeskin from Springfield Leather.

Edited November 23, 2014 by NVLeatherWorx

[Troy Burch]

If you are purchasing rattlesnake skins from Tandy then you are buying a product that is not part of their company inventory. Tandy Leather only sells Python skins and I have never had an issue with the scales coming off. One little trick that I picked up years ago was to seal the finish (in this case the scales) by applying a top coat sealant; I use the Clear-Lac from LCI and I make sure that it gets under the scales so it acts like a glue.

However, I have found that it is a common practice to use snakeskin as if it were a main material, it is intended to be used as an inlay material only.

I purchase my snakeskin from Springfield Leather.

I use the same neat-lac well clear-lac method as well, and it works pretty good. I live about 30 minutes from Tandys warehouse in Fort Worth and they keep a stock of rattlesnake skins there. They are even in the sale flyers they send me sometimes. I haven't bought from Tandy in a few years so mabye they've quit. I do believe they're listed in the older catalogs I have. Thanks for the Springfield tip. By the way I was browseing thru the picture gallery the other day and your work is really good. Troy

[NVLeatherWorx]

They quit doing rattlesnake quite awhile back; however, the local stores do have the ability to purchase special items from local trappers/tanners so if they are still available then that is how. My local store deals with one of the Native American Tribes in my area for Coyote skins but they only do it when someone comes in and requests the special order. The nice thing about Springfield Leather is that they also carry a few other snake skins such as Cobra (with the head still attached; makes an awesome finished item if used right) and other unique skins.

And thank you for your kind words on my works.

[papaw]

My snake skin boots have the scales on, I don't do any work with snake (yet) but the boots where over 425. and made by known boot maker, who has passed on now but boots are around still.(over 15 years old probably)