Jump to content

Recommended Posts

Posted

Hi Frankqv,

Finding parts for the 45K machines is a challenge for sure. I'm pulling my hair out looking for a right presser foot and other parts for my 45K25.

If you're going to make presser feet, would you want some additional work?

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Posted

If i make a few I will rough out some Blanks for the K53 and finish them as I need them.I'll let you know if I decide to do that.To those that are considerably more Knowledgeable than me,would it be possible to machine a new presser bar,and finish the end to take more common pressers?

Posted

That's fine. Thanks Frank.

Posted

That's fine. Thanks Frank.

Won't the pressers from a GA5 fit the K25

Posted (edited)

I don't know. I'll check.

What is a GA5?

Thanks Frank

Edited by Evo160K
  • Members
Posted

GA5 is the modern coppie of the 45K. Toledos version is the CB 2500

http://www.tolindsewmach.com/cb2500.html

~ Keep "OLD CAST IRON" alive - it´s worth it ~

Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2

Posted

Constabulary, thanks for the information and link. I appreciate it.

Posted

Frank, thanks for the link. I'll check to see if they have the right foot also

Posted

Attached is the new left Presser I made for the K53,also a pic of the one that came with it. The one that came with it is Bronze,the new one is 6061-T65 Alloy,about twice the tensile. Works like a charm,feeds very well. Also working on a regular presser,just have to machine the needle slot.

and a new needle plate/feed plate is a work in progress

post-49696-0-54550300-1418259924_thumb.jpost-49696-0-97578000-1418259971_thumb.jpost-49696-0-78085900-1418259987_thumb.jpost-49696-0-67260800-1418259940_thumb.j


Attached is the new left Presser I made for the K53,also a pic of the one that came with it. The one that came with it is Bronze,the new one is 6061-T65 Alloy,about twice the tensile. Works like a charm,feeds very well. Also working on a regular presser,just have to machine the needle slot.

and a new needle plate/feed plate is a work in progress

post-49696-0-54550300-1418259924_thumb.jpost-49696-0-97578000-1418259971_thumb.jpost-49696-0-78085900-1418259987_thumb.jpost-49696-0-67260800-1418259940_thumb.j

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...