SmokeCigars Report post Posted January 30, 2015 (edited) I recently picked up a Ruger GP100, and wanted to take a stab at making a pancake holster for it. I am fairly happy with the design, but I was a little bit off on the stitch line of the trigger guard. I underestimated how much room the cylinder takes up. It is actually a fairly comfortable holster to wear. The draw is pretty natural feeling. It is canted much further forward that a lot of holsters on the market, but it works well with my short arms and stocky build. Staining was a little uneven, which I was assuming would happen since I didn't use a great piece of leather to start. I figured I would probably make at least one mistake. It was close to the edge, and was water spotted before I started. Also had a bit of pitting to it. It will be serviceable for now until I can get to making another this weekend. EDIT: I also realize I am in need of a stitching groover and a punch for the belt holes. Edited January 30, 2015 by SmokeCigars Quote Share this post Link to post Share on other sites
Rohn Report post Posted January 30, 2015 Not bad for a first. I like the color. Yes, a slot punch for the belt loops will be a great improvement. Quote Share this post Link to post Share on other sites
BIGGUNDOCTOR Report post Posted January 30, 2015 Those are great pistols. I prefer the 6" full lug models myself, but those are not for carrying. I have a group that a quarter will cover all 6 shots, and I could hit an 8" wide H-beam from 100 yards offhand with mine. Quote Share this post Link to post Share on other sites
TexasJack Report post Posted January 31, 2015 The GP100 is a great pistol. You won't regret buying one. As for the sheath, I like the overall look. If it was me, I think I'd cover the entire trigger guard. Quote Share this post Link to post Share on other sites
SmokeCigars Report post Posted January 31, 2015 Covering the whole trigger guard was the original plan. Like I said, I measured my stitch line placement a little off, and it doesn't seat down where I want it. I think when I remake it, I will leave the back stitch line where it is at, and move the front forward about 3/4" so I have some space to mold a better tunnel for the front sight, and also get the trigger into place. Quote Share this post Link to post Share on other sites
Colt W Knight Report post Posted January 31, 2015 What I have come to learn is holster making is as much art as science. I still haven't made enough t get the feel for placing those stitching lines perfect. Quote Share this post Link to post Share on other sites
