woolfe Report post Posted March 28, 2015 (edited) Hey all, I've been dragging my feet on doing this for almost 2 years now. The time has finally come. Artisan Toro 3000 $1600 I'm the original owner. It comes with everything it came with new. Flat top table (not installed in pic), 4 bobbins, 3 different presser feet, misc tools, oil, work light, DVD. I'm also throwing in the thread shown in the pic white, black, brown, and tan. The thread is a mix of #277 and #346 and 2 packs of needles. I cannot ship this. It's located in Raleigh NC. Pull the DOT snaps in bulk. I have roughly 500 each of the Caps, Sockets (hard strength), and Studs, 250 each of the posts asking $250 shipped, I don't want to separate these. A full box of 1000 regular strength sockets $175 shipped. These are all in government black. Will do $400 shipped for all of the snaps. I used 6/32 x 3/8 black machine screws and 6/32 T nuts to attach the studs. I have a few hundred of both I can throw in for another $20. Dummy guns $35 each shipped. $5 off per gun if you buy more than one. Some of the safeties have been ground off. I would make an indention in the leather to match the requested safety position. On the 1911's I drilled a hole and used an after market safety to mold them. I only have one of the after market safeties so you will most likely get one with it ground out and a drilled hole for the safety post. In no particular order: Kimber Solo 1911 5" Operator w/ Rails 1911 5" 1911 4" 1911 3" Beretta PX4 Storm Full size Beretta PX4 Storm sub compact Beretta 92FS Keltec PF9 Ruger LC9 with Crimsontrace Ruger LCP Ruger LCP with Crimsontrace Smith M&P Shield Smitth Bodyguard Smith model 4506-1 H&K USP Compact H&K 45C H&K P7M8 Walther PPS Taurus 738 TCP Sig P238 with sig laser Sig P238 Sig P938 Sig P230 Sig P226 rails Sig P290 Sig P229 rails Sig P225 Sig P226 Sig P229 Sig P239 Springfiled XD sub compact 3" Springfiled XD 4" Springfield XDS 3.3 Springfield XDM 4.5" Glock 19 Glock 36 Glock 26 Glock 21 Glock 17 Crimson Trace laser for Kahr 437 $100 shipped...No battery I have a Kahr 380 dummy with a Crimson trace 433 bolted to it floating around somewhere. $100 shipped for the laser when I can find it. $35 for the dummy... This is assuming I can find it. WIll use PayPay for everything. Edited March 28, 2015 by woolfe Quote Share this post Link to post Share on other sites
JLSleather Report post Posted March 28, 2015 Message sent ..... Quote Share this post Link to post Share on other sites
Colt Hammerless Report post Posted March 28, 2015 Are you selling magazines (dummy and/or real) as well? Quote Share this post Link to post Share on other sites
woolfe Report post Posted March 28, 2015 (edited) Mags sold Edited March 28, 2015 by woolfe Quote Share this post Link to post Share on other sites
camano ridge Report post Posted March 28, 2015 Pm sent Quote Share this post Link to post Share on other sites
JLSleather Report post Posted March 28, 2015 Payment sent Quote Share this post Link to post Share on other sites
Troy I Report post Posted March 28, 2015 PM sent Quote Share this post Link to post Share on other sites
Colt Hammerless Report post Posted March 28, 2015 I must have been too late on the mags. I sent a PM about wanting the 3 inch 1911 earlier, but the message says it wasn't read yet. Wanted to make sure you saw it. Paul Quote Share this post Link to post Share on other sites
woolfe Report post Posted March 28, 2015 (edited) I replied to you Paul. Since I can no longer edit the original post I will post when Items are sold. Sig P238 SOLD I also have two gum rubber pads for use with a hydraulic press 12"x12"x1" 40 durometer They were purchased from McMaster Carr. New they are $83 each! $90 shipped for the pair of them. Edited March 28, 2015 by woolfe Quote Share this post Link to post Share on other sites
woolfe Report post Posted March 28, 2015 3" 1911 SOLD Quote Share this post Link to post Share on other sites
woolfe Report post Posted March 28, 2015 M&P Shield SOLD Quote Share this post Link to post Share on other sites
Troy I Report post Posted March 28, 2015 Payment sent Quote Share this post Link to post Share on other sites
woolfe Report post Posted March 29, 2015 T-nuts and machine screws SOLD Quote Share this post Link to post Share on other sites
cleanview Report post Posted March 29, 2015 (edited) pm sent Edited March 29, 2015 by cleanview Quote Share this post Link to post Share on other sites
Joon1911 Report post Posted March 29, 2015 Payment sent. Quote Share this post Link to post Share on other sites
woolfe Report post Posted March 29, 2015 Pull the DOT snaps are all SOLD Springfield XDS 3.3 SOLD H&K P7M8 SOLD Quote Share this post Link to post Share on other sites
woolfe Report post Posted March 31, 2015 Glock 19, 26, 36, 21 all SOLD Quote Share this post Link to post Share on other sites
Double Daddy Report post Posted March 31, 2015 PM sent Quote Share this post Link to post Share on other sites
woolfe Report post Posted April 2, 2015 (edited) Glock 17 SOLD This is what I have left: Two gum rubber pads for use with a hydraulic press 12"x12"x1" 40 durometer They were purchased from McMaster Carr. New they are $83 each! $90 shipped for the pair of them. The Toro 3000 Dummy guns: 1911 5" Operator w/ Rails 1911 5" 1911 4" Beretta PX4 Storm Full size Beretta PX4 Storm sub compact Beretta 92FS Keltec PF9 Ruger LC9 with Crimsontrace Ruger LCP Ruger LCP with Crimsontrace Smith M&P Shield Smitth Bodyguard Smith model 4506-1 H&K USP Compact H&K 45C Walther PPS Taurus 738 TCP Sig P238 with sig laser Sig P230 Sig P226 rails Sig P290 Sig P229 rails Sig P225 Sig P226 Sig P229 Sig P239 Springfiled XD sub compact 3" Springfiled XD 4" Springfield XDM 4.5" Edited April 2, 2015 by woolfe Quote Share this post Link to post Share on other sites
Troy I Report post Posted April 2, 2015 Package arrived today...thanks Quote Share this post Link to post Share on other sites
Colt Hammerless Report post Posted April 2, 2015 Just got mine as well. Thanks! Paul Quote Share this post Link to post Share on other sites
woolfe Report post Posted April 6, 2015 SOLD 1911 5" Operator w/ RailsandSpringfiled XD sub compact 3" Quote Share this post Link to post Share on other sites
